feat: major update to all configs

- move older config to archive

Signed-off-by: Avinal Kumar <avinal.xlvii@gmail.com>

archive/.config/dunst/dunstrc

@@ -0,0 +1,461 @@
+# See dunst(5) for all configuration options
+
+[global]
+    ### Display ###
+
+    # Which monitor should the notifications be displayed on.
+    monitor = 0
+
+    # Display notification on focused monitor.  Possible modes are:
+    #   mouse: follow mouse pointer
+    #   keyboard: follow window with keyboard focus
+    #   none: don't follow anything
+    #
+    # "keyboard" needs a window manager that exports the
+    # _NET_ACTIVE_WINDOW property.
+    # This should be the case for almost all modern window managers.
+    #
+    # If this option is set to mouse or keyboard, the monitor option
+    # will be ignored.
+    follow = mouse
+
+    ### Geometry ###
+
+    # dynamic width from 0 to 300
+    # width = (0, 300)
+    # constant width of 300
+    width = 500
+
+    # The maximum height of a single notification, excluding the frame.
+    height = 300
+
+    # Position the notification in the top right corner
+    origin = bottom-right
+
+    # Offset from the origin
+    offset = 20x50
+
+    # Scale factor. It is auto-detected if value is 0.
+    scale = 0
+
+    # Maximum number of notification (0 means no limit)
+    notification_limit = 20
+
+    ### Progress bar ###
+
+    # Turn on the progess bar. It appears when a progress hint is passed with
+    # for example dunstify -h int:value:12
+    progress_bar = true
+
+    # Set the progress bar height. This includes the frame, so make sure
+    # it's at least twice as big as the frame width.
+    progress_bar_height = 10
+
+    # Set the frame width of the progress bar
+    progress_bar_frame_width = 1
+
+    # Set the minimum width for the progress bar
+    progress_bar_min_width = 150
+
+    # Set the maximum width for the progress bar
+    progress_bar_max_width = 450
+
+    # Corner radius for the progress bar. 0 disables rounded corners.
+    progress_bar_corner_radius = 0
+
+    # Corner radius for the icon image.
+    icon_corner_radius = 0
+
+    # Show how many messages are currently hidden (because of
+    # notification_limit).
+    indicate_hidden = yes
+
+    # The transparency of the window.  Range: [0; 100].
+    # This option will only work if a compositing window manager is
+    # present (e.g. xcompmgr, compiz, etc.). (X11 only)
+    transparency = 0
+
+    # Draw a line of "separator_height" pixel height between two
+    # notifications.
+    # Set to 0 to disable.
+    # If gap_size is greater than 0, this setting will be ignored.
+    separator_height = 2
+
+    # Padding between text and separator.
+    padding = 8
+
+    # Horizontal padding.
+    horizontal_padding = 8
+
+    # Padding between text and icon.
+    text_icon_padding = 0
+
+    # Defines width in pixels of frame around the notification window.
+    # Set to 0 to disable.
+    frame_width = 3
+
+    # Defines color of the frame around the notification window.
+    frame_color = "#aaaaaa"
+
+    # Size of gap to display between notifications - requires a compositor.
+    # If value is greater than 0, separator_height will be ignored and a border
+    # of size frame_width will be drawn around each notification instead.
+    # Click events on gaps do not currently propagate to applications below.
+    gap_size = 5
+
+    # Define a color for the separator.
+    # possible values are:
+    #  * auto: dunst tries to find a color fitting to the background;
+    #  * foreground: use the same color as the foreground;
+    #  * frame: use the same color as the frame;
+    #  * anything else will be interpreted as a X color.
+    separator_color = frame
+
+    # Sort messages by urgency.
+    sort = yes
+
+    # Don't remove messages, if the user is idle (no mouse or keyboard input)
+    # for longer than idle_threshold seconds.
+    # Set to 0 to disable.
+    # A client can set the 'transient' hint to bypass this. See the rules
+    # section for how to disable this if necessary
+    # idle_threshold = 120
+
+    ### Text ###
+
+    font = "Monaspace Radon" 11
+
+    # The spacing between lines.  If the height is smaller than the
+    # font height, it will get raised to the font height.
+    line_height = 0
+
+    # Possible values are:
+    # full: Allow a small subset of html markup in notifications:
+    #        <b>bold</b>
+    #        <i>italic</i>
+    #        <s>strikethrough</s>
+    #        <u>underline</u>
+    #
+    #        For a complete reference see
+    #        <https://docs.gtk.org/Pango/pango_markup.html>.
+    #
+    # strip: This setting is provided for compatibility with some broken
+    #        clients that send markup even though it's not enabled on the
+    #        server. Dunst will try to strip the markup but the parsing is
+    #        simplistic so using this option outside of matching rules for
+    #        specific applications *IS GREATLY DISCOURAGED*.
+    #
+    # no:    Disable markup parsing, incoming notifications will be treated as
+    #        plain text. Dunst will not advertise that it has the body-markup
+    #        capability if this is set as a global setting.
+    #
+    # It's important to note that markup inside the format option will be parsed
+    # regardless of what this is set to.
+    markup = full
+
+    # The format of the message.  Possible variables are:
+    #   %a  appname
+    #   %s  summary
+    #   %b  body
+    #   %i  iconname (including its path)
+    #   %I  iconname (without its path)
+    #   %p  progress value if set ([  0%] to [100%]) or nothing
+    #   %n  progress value if set without any extra characters
+    #   %%  Literal %
+    # Markup is allowed
+    format = "<b>%s</b>\n%b"
+
+    # Alignment of message text.
+    # Possible values are "left", "center" and "right".
+    alignment = left
+
+    # Vertical alignment of message text and icon.
+    # Possible values are "top", "center" and "bottom".
+    vertical_alignment = center
+
+    # Show age of message if message is older than show_age_threshold
+    # seconds.
+    # Set to -1 to disable.
+    show_age_threshold = 60
+
+    # Specify where to make an ellipsis in long lines.
+    # Possible values are "start", "middle" and "end".
+    ellipsize = middle
+
+    # Ignore newlines '\n' in notifications.
+    ignore_newline = no
+
+    # Stack together notifications with the same content
+    stack_duplicates = true
+
+    # Hide the count of stacked notifications with the same content
+    hide_duplicate_count = false
+
+    # Display indicators for URLs (U) and actions (A).
+    show_indicators = yes
+
+    ### Icons ###
+
+    # Recursive icon lookup. You can set a single theme, instead of having to
+    # define all lookup paths.
+    enable_recursive_icon_lookup = true
+
+    # Set icon theme (only used for recursive icon lookup)
+    icon_theme = Adwaita
+    # You can also set multiple icon themes, with the leftmost one being used first.
+    # icon_theme = "Adwaita, breeze"
+
+    # Align icons left/right/top/off
+    icon_position = left
+
+    # Scale small icons up to this size, set to 0 to disable. Helpful
+    # for e.g. small files or high-dpi screens. In case of conflict,
+    # max_icon_size takes precedence over this.
+    min_icon_size = 32
+
+    # Scale larger icons down to this size, set to 0 to disable
+    max_icon_size = 128
+
+    # Paths to default icons (only neccesary when not using recursive icon lookup)
+    icon_path = /usr/share/icons/gnome/16x16/status/:/usr/share/icons/gnome/16x16/devices/
+
+    ### History ###
+
+    # Should a notification popped up from history be sticky or timeout
+    # as if it would normally do.
+    sticky_history = yes
+
+    # Maximum amount of notifications kept in history
+    history_length = 20
+
+    ### Misc/Advanced ###
+
+    # dmenu path.
+    dmenu = /usr/bin/dmenu -p dunst:
+
+    # Browser for opening urls in context menu.
+    browser = /usr/bin/firefox -new-tab
+
+    # Always run rule-defined scripts, even if the notification is suppressed
+    always_run_script = true
+
+    # Define the title of the windows spawned by dunst
+    title = Dunst
+
+    # Define the class of the windows spawned by dunst
+    class = Dunst
+
+    # Define the corner radius of the notification window
+    # in pixel size. If the radius is 0, you have no rounded
+    # corners.
+    # The radius will be automatically lowered if it exceeds half of the
+    # notification height to avoid clipping text and/or icons.
+    corner_radius = 0
+
+    # Ignore the dbus closeNotification message.
+    # Useful to enforce the timeout set by dunst configuration. Without this
+    # parameter, an application may close the notification sent before the
+    # user defined timeout.
+    ignore_dbusclose = false
+
+    ### Wayland ###
+    # These settings are Wayland-specific. They have no effect when using X11
+
+    # Uncomment this if you want to let notications appear under fullscreen
+    # applications (default: overlay)
+    # layer = top
+
+    # Set this to true to use X11 output on Wayland.
+    force_xwayland = false
+
+    ### Legacy
+
+    # Use the Xinerama extension instead of RandR for multi-monitor support.
+    # This setting is provided for compatibility with older nVidia drivers that
+    # do not support RandR and using it on systems that support RandR is highly
+    # discouraged.
+    #
+    # By enabling this setting dunst will not be able to detect when a monitor
+    # is connected or disconnected which might break follow mode if the screen
+    # layout changes.
+    force_xinerama = false
+
+    ### mouse
+
+    # Defines list of actions for each mouse event
+    # Possible values are:
+    # * none: Don't do anything.
+    # * do_action: Invoke the action determined by the action_name rule. If there is no
+    #              such action, open the context menu.
+    # * open_url: If the notification has exactly one url, open it. If there are multiple
+    #             ones, open the context menu.
+    # * close_current: Close current notification.
+    # * close_all: Close all notifications.
+    # * context: Open context menu for the notification.
+    # * context_all: Open context menu for all notifications.
+    # These values can be strung together for each mouse event, and
+    # will be executed in sequence.
+    mouse_left_click = close_current
+    mouse_middle_click = do_action, close_current
+    mouse_right_click = close_all
+
+# Experimental features that may or may not work correctly. Do not expect them
+# to have a consistent behaviour across releases.
+[experimental]
+    # Calculate the dpi to use on a per-monitor basis.
+    # If this setting is enabled the Xft.dpi value will be ignored and instead
+    # dunst will attempt to calculate an appropriate dpi value for each monitor
+    # using the resolution and physical size. This might be useful in setups
+    # where there are multiple screens with very different dpi values.
+    per_monitor_dpi = false
+
+
+[urgency_low]
+    # IMPORTANT: colors have to be defined in quotation marks.
+    # Otherwise the "#" and following would be interpreted as a comment.
+    background = "#161616"
+    foreground = "#ffffff"
+    frame_color = "#ffffff"
+    timeout = 10
+    # Icon for notifications with low urgency, uncomment to enable
+    #default_icon = /path/to/icon
+
+[urgency_normal]
+    background = "#161616"
+    foreground = "#ffffff"
+    frame_color = "#2dc7c4"
+    timeout = 10
+    # Icon for notifications with normal urgency, uncomment to enable
+    #default_icon = /path/to/icon
+
+[urgency_critical]
+    background = "#161616"
+    foreground = "#f16da6"
+    frame_color = "#ff0000"
+    timeout = 0
+    # Icon for notifications with critical urgency, uncomment to enable
+    #default_icon = /path/to/icon
+
+# Every section that isn't one of the above is interpreted as a rules to
+# override settings for certain messages.
+#
+# Messages can be matched by
+#    appname (discouraged, see desktop_entry)
+#    body
+#    category
+#    desktop_entry
+#    icon
+#    match_transient
+#    msg_urgency
+#    stack_tag
+#    summary
+#
+# and you can override the
+#    background
+#    foreground
+#    format
+#    frame_color
+#    fullscreen
+#    new_icon
+#    set_stack_tag
+#    set_transient
+#    set_category
+#    timeout
+#    urgency
+#    icon_position
+#    skip_display
+#    history_ignore
+#    action_name
+#    word_wrap
+#    ellipsize
+#    alignment
+#    hide_text
+#
+# Shell-like globbing will get expanded.
+#
+# Instead of the appname filter, it's recommended to use the desktop_entry filter.
+# GLib based applications export their desktop-entry name. In comparison to the appname,
+# the desktop-entry won't get localized.
+#
+# SCRIPTING
+# You can specify a script that gets run when the rule matches by
+# setting the "script" option.
+# The script will be called as follows:
+#   script appname summary body icon urgency
+# where urgency can be "LOW", "NORMAL" or "CRITICAL".
+#
+# NOTE: It might be helpful to run dunst -print in a terminal in order
+# to find fitting options for rules.
+
+# Disable the transient hint so that idle_threshold cannot be bypassed from the
+# client
+#[transient_disable]
+#    match_transient = yes
+#    set_transient = no
+#
+# Make the handling of transient notifications more strict by making them not
+# be placed in history.
+#[transient_history_ignore]
+#    match_transient = yes
+#    history_ignore = yes
+
+# fullscreen values
+# show: show the notifications, regardless if there is a fullscreen window opened
+# delay: displays the new notification, if there is no fullscreen window active
+#        If the notification is already drawn, it won't get undrawn.
+# pushback: same as delay, but when switching into fullscreen, the notification will get
+#           withdrawn from screen again and will get delayed like a new notification
+#[fullscreen_delay_everything]
+#    fullscreen = delay
+#[fullscreen_show_critical]
+#    msg_urgency = critical
+#    fullscreen = show
+
+#[espeak]
+#    summary = "*"
+#    script = dunst_espeak.sh
+
+#[script-test]
+#    summary = "*script*"
+#    script = dunst_test.sh
+
+#[ignore]
+#    # This notification will not be displayed
+#    summary = "foobar"
+#    skip_display = true
+
+#[history-ignore]
+#    # This notification will not be saved in history
+#    summary = "foobar"
+#    history_ignore = yes
+
+#[skip-display]
+#    # This notification will not be displayed, but will be included in the history
+#    summary = "foobar"
+#    skip_display = yes
+
+#[signed_on]
+#    appname = Pidgin
+#    summary = "*signed on*"
+#    urgency = low
+#
+#[signed_off]
+#    appname = Pidgin
+#    summary = *signed off*
+#    urgency = low
+#
+#[says]
+#    appname = Pidgin
+#    summary = *says*
+#    urgency = critical
+#
+#[twitter]
+#    appname = Pidgin
+#    summary = *twitter.com*
+#    urgency = normal
+#
+#[stack-volumes]
+#    appname = "some_volume_notifiers"
+#    set_stack_tag = "volume"
+#
+# vim: ft=cfg

archive/.config/environment.d/sway.conf

@@ -0,0 +1,4 @@
+XDG_DATA_HOME=$HOME/.local/share
+XDG_CONFIG_HOME=$HOME/.config
+XDG_STATE_HOME=$HOME/.local/state
+XDG_CACHE_HOME=$HOME/.cache

archive/.config/nvim/.stylua.toml

@@ -0,0 +1,6 @@
+column_width = 160
+line_endings = "Unix"
+indent_type = "Spaces"
+indent_width = 2
+quote_style = "AutoPreferSingle"
+call_parentheses = "None"

archive/.config/nvim/LICENSE

@@ -0,0 +1,19 @@
+MIT License
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.

archive/.config/nvim/init.lua

@@ -0,0 +1,35 @@
+-- Set <space> as the leader key
+-- See `:help mapleader`
+--  NOTE: Must happen before plugins are loaded (otherwise wrong leader will be used)
+vim.g.mapleader = ' '
+vim.g.maplocalleader = ' '
+
+-- Set to true if you have a Nerd Font installed and selected in the terminal
+vim.g.have_nerd_font = true
+
+-- Set additional path because the information is lost inside zellij
+local bin_paths = {
+  '/home/avinal/.nvm/versions/node/v22.1.0/bin',
+  '/home/avinal/.local/bin',
+  '/home/avinal/.krew/bin',
+  '/home/avinal/bin',
+  '/usr/local/go/bin',
+  '/home/avinal/go/bin',
+}
+
+vim.env.PATH = table.concat(bin_paths, ':') .. ':' .. vim.env.PATH
+
+-- [[ Setting options ]]
+require 'options'
+
+-- [[ Basic Keymaps ]]
+require 'keymaps'
+
+-- [[ Install `lazy.nvim` plugin manager ]]
+require 'lazy-bootstrap'
+
+-- [[ Configure and install plugins ]]
+require 'lazy-plugins'
+
+-- The line beneath this is called `modeline`. See `:help modeline`
+-- vim: ts=2 sts=2 sw=2 et

archive/.config/nvim/lazy-lock.json

@@ -0,0 +1,41 @@
+{
+  "Comment.nvim": { "branch": "master", "commit": "e30b7f2008e52442154b66f7c519bfd2f1e32acb" },
+  "LuaSnip": { "branch": "master", "commit": "33b06d72d220aa56a7ce80a0dd6f06c70cd82b9d" },
+  "cmp-nvim-lsp": { "branch": "main", "commit": "99290b3ec1322070bcfb9e846450a46f6efa50f0" },
+  "cmp-path": { "branch": "main", "commit": "91ff86cd9c29299a64f968ebb45846c485725f23" },
+  "cmp_luasnip": { "branch": "master", "commit": "98d9cb5c2c38532bd9bdb481067b20fea8f32e90" },
+  "conform.nvim": { "branch": "master", "commit": "9180320205d250429f0f80e073326c674e2a7149" },
+  "fidget.nvim": { "branch": "main", "commit": "9238947645ce17d96f30842e61ba81147185b657" },
+  "gitsigns.nvim": { "branch": "main", "commit": "5f808b5e4fef30bd8aca1b803b4e555da07fc412" },
+  "indent-blankline.nvim": { "branch": "master", "commit": "259357fa4097e232730341fa60988087d189193a" },
+  "lazy.nvim": { "branch": "main", "commit": "7e6c863bc7563efbdd757a310d17ebc95166cef3" },
+  "mason-lspconfig.nvim": { "branch": "main", "commit": "c6c686781f9841d855bf1b926e10aa5e19430a38" },
+  "mason-nvim-dap.nvim": { "branch": "main", "commit": "8b9363d83b5d779813cdd2819b8308651cec2a09" },
+  "mason-tool-installer.nvim": { "branch": "main", "commit": "c5e07b8ff54187716334d585db34282e46fa2932" },
+  "mason.nvim": { "branch": "main", "commit": "e2f7f9044ec30067bc11800a9e266664b88cda22" },
+  "mini.nvim": { "branch": "main", "commit": "9df78f3cdf9bdcc5aaf93cc51412a69a384041b2" },
+  "neo-tree.nvim": { "branch": "main", "commit": "a77af2e764c5ed4038d27d1c463fa49cd4794e07" },
+  "neodev.nvim": { "branch": "main", "commit": "46aa467dca16cf3dfe27098042402066d2ae242d" },
+  "nightfox.nvim": { "branch": "main", "commit": "595ffb8f291fc4a9bef3201a28b7c0379a41cdee" },
+  "nui.nvim": { "branch": "main", "commit": "53e907ffe5eedebdca1cd503b00aa8692068ca46" },
+  "nvim-autopairs": { "branch": "master", "commit": "b464658e9b880f463b9f7e6ccddd93fb0013f559" },
+  "nvim-cmp": { "branch": "main", "commit": "b555203ce4bd7ff6192e759af3362f9d217e8c89" },
+  "nvim-colorizer.lua": { "branch": "master", "commit": "8a65c448122fc8fac9c67b2e857b6e830a4afd0b" },
+  "nvim-dap": { "branch": "master", "commit": "0e673accbb512e1e191dfb4fecea89cc38c1bcdd" },
+  "nvim-dap-go": { "branch": "main", "commit": "6aa88167ea1224bcef578e8c7160fe8afbb44848" },
+  "nvim-dap-ui": { "branch": "master", "commit": "e94d98649dccb6a3884b66aabc2e07beb279e535" },
+  "nvim-lint": { "branch": "master", "commit": "1fea92f1d9908eaa5eb8bafe08b4293d7aadaa55" },
+  "nvim-lspconfig": { "branch": "master", "commit": "8b15a1a597a59f4f5306fad9adfe99454feab743" },
+  "nvim-nio": { "branch": "master", "commit": "a428f309119086dc78dd4b19306d2d67be884eee" },
+  "nvim-treesitter": { "branch": "master", "commit": "5f78e989243f9fb0fb55e0cf54820920d86dfd30" },
+  "nvim-web-devicons": { "branch": "master", "commit": "4adeeaa7a32d46cf3b5833341358c797304f950a" },
+  "plenary.nvim": { "branch": "master", "commit": "2d9b06177a975543726ce5c73fca176cedbffe9d" },
+  "tailwind-tools": { "branch": "master", "commit": "3703e162d819a04b128902c508276553dae0dfb8" },
+  "telescope-fzf-native.nvim": { "branch": "main", "commit": "dae2eac9d91464448b584c7949a31df8faefec56" },
+  "telescope-ui-select.nvim": { "branch": "master", "commit": "6e51d7da30bd139a6950adf2a47fda6df9fa06d2" },
+  "telescope.nvim": { "branch": "0.1.x", "commit": "a0bbec21143c7bc5f8bb02e0005fa0b982edc026" },
+  "todo-comments.nvim": { "branch": "main", "commit": "ae0a2afb47cf7395dc400e5dc4e05274bf4fb9e0" },
+  "vim-sleuth": { "branch": "master", "commit": "be69bff86754b1aa5adcbb527d7fcd1635a84080" },
+  "vim-wakatime": { "branch": "master", "commit": "cf51327a9e08935569614d1cb24e779ee9f45519" },
+  "which-key.nvim": { "branch": "main", "commit": "8ab96b38a2530eacba5be717f52e04601eb59326" }
+}

archive/.config/nvim/lua/custom/plugins/colorizer.lua

@@ -0,0 +1,6 @@
+return {
+  'NvChad/nvim-colorizer.lua',
+  config = function()
+    require('colorizer').setup()
+  end,
+}

archive/.config/nvim/lua/custom/plugins/init.lua

@@ -0,0 +1,7 @@
+-- You can add your own plugins here or in other files in this directory!
+--  I promise not to create any merge conflicts in this directory :)
+--
+-- See the kickstart.nvim README for more information
+return {
+  { 'wakatime/vim-wakatime', lazy = false },
+}

archive/.config/nvim/lua/custom/plugins/tailwind.lua

@@ -0,0 +1,12 @@
+-- tailwind-tools.lua
+return {
+  'luckasRanarison/tailwind-tools.nvim',
+  name = 'tailwind-tools',
+  build = ':UpdateRemotePlugins',
+  dependencies = {
+    'nvim-treesitter/nvim-treesitter',
+    'nvim-telescope/telescope.nvim', -- optional
+    'neovim/nvim-lspconfig', -- optional
+  },
+  opts = {}, -- your configuration
+}

archive/.config/nvim/lua/custom/plugins/themes.lua

@@ -0,0 +1,25 @@
+return {
+  'EdenEast/nightfox.nvim',
+
+  priority = 1000,
+  init = function()
+    vim.opt.background = 'dark'
+    vim.cmd.colorscheme 'carbonfox'
+  end,
+  config = function()
+    require('nightfox').setup {
+      options = {
+        styles = {
+          comments = 'italic',
+        },
+      },
+      -- groups = {
+      --   carbonfox = {
+      --     string = { fg = 'white' },
+      --   },
+      -- },
+    }
+  end,
+}
+
+--- vim: ts=2 sts=2 sw=2 et

archive/.config/nvim/lua/keymaps.lua

@@ -0,0 +1,51 @@
+-- [[ Basic Keymaps ]]
+--  See `:help vim.keymap.set()`
+
+-- Set highlight on search, but clear on pressing <Esc> in normal mode
+vim.opt.hlsearch = true
+vim.keymap.set('n', '<Esc>', '<cmd>nohlsearch<CR>')
+
+-- Diagnostic keymaps
+vim.keymap.set('n', '[d', vim.diagnostic.goto_prev, { desc = 'Go to previous [D]iagnostic message' })
+vim.keymap.set('n', ']d', vim.diagnostic.goto_next, { desc = 'Go to next [D]iagnostic message' })
+vim.keymap.set('n', '<leader>e', vim.diagnostic.open_float, { desc = 'Show diagnostic [E]rror messages' })
+vim.keymap.set('n', '<leader>q', vim.diagnostic.setloclist, { desc = 'Open diagnostic [Q]uickfix list' })
+
+-- Exit terminal mode in the builtin terminal with a shortcut that is a bit easier
+-- for people to discover. Otherwise, you normally need to press <C-\><C-n>, which
+-- is not what someone will guess without a bit more experience.
+--
+-- NOTE: This won't work in all terminal emulators/tmux/etc. Try your own mapping
+-- or just use <C-\><C-n> to exit terminal mode
+vim.keymap.set('t', '<Esc><Esc>', '<C-\\><C-n>', { desc = 'Exit terminal mode' })
+
+-- TIP: Disable arrow keys in normal mode
+-- vim.keymap.set('n', '<left>', '<cmd>echo "Use h to move!!"<CR>')
+-- vim.keymap.set('n', '<right>', '<cmd>echo "Use l to move!!"<CR>')
+-- vim.keymap.set('n', '<up>', '<cmd>echo "Use k to move!!"<CR>')
+-- vim.keymap.set('n', '<down>', '<cmd>echo "Use j to move!!"<CR>')
+
+-- Keybinds to make split navigation easier.
+--  Use CTRL+<hjkl> to switch between windows
+--
+--  See `:help wincmd` for a list of all window commands
+vim.keymap.set('n', '<C-h>', '<C-w><C-h>', { desc = 'Move focus to the left window' })
+vim.keymap.set('n', '<C-l>', '<C-w><C-l>', { desc = 'Move focus to the right window' })
+vim.keymap.set('n', '<C-j>', '<C-w><C-j>', { desc = 'Move focus to the lower window' })
+vim.keymap.set('n', '<C-k>', '<C-w><C-k>', { desc = 'Move focus to the upper window' })
+
+-- [[ Basic Autocommands ]]
+--  See `:help lua-guide-autocommands`
+
+-- Highlight when yanking (copying) text
+--  Try it with `yap` in normal mode
+--  See `:help vim.highlight.on_yank()`
+vim.api.nvim_create_autocmd('TextYankPost', {
+  desc = 'Highlight when yanking (copying) text',
+  group = vim.api.nvim_create_augroup('kickstart-highlight-yank', { clear = true }),
+  callback = function()
+    vim.highlight.on_yank()
+  end,
+})
+
+-- vim: ts=2 sts=2 sw=2 et

archive/.config/nvim/lua/kickstart/health.lua

@@ -0,0 +1,52 @@
+--[[
+--
+-- This file is not required for your own configuration,
+-- but helps people determine if their system is setup correctly.
+--
+--]]
+
+local check_version = function()
+  local verstr = string.format('%s.%s.%s', vim.version().major, vim.version().minor, vim.version().patch)
+  if not vim.version.cmp then
+    vim.health.error(string.format("Neovim out of date: '%s'. Upgrade to latest stable or nightly", verstr))
+    return
+  end
+
+  if vim.version.cmp(vim.version(), { 0, 9, 4 }) >= 0 then
+    vim.health.ok(string.format("Neovim version is: '%s'", verstr))
+  else
+    vim.health.error(string.format("Neovim out of date: '%s'. Upgrade to latest stable or nightly", verstr))
+  end
+end
+
+local check_external_reqs = function()
+  -- Basic utils: `git`, `make`, `unzip`
+  for _, exe in ipairs { 'git', 'make', 'unzip', 'rg' } do
+    local is_executable = vim.fn.executable(exe) == 1
+    if is_executable then
+      vim.health.ok(string.format("Found executable: '%s'", exe))
+    else
+      vim.health.warn(string.format("Could not find executable: '%s'", exe))
+    end
+  end
+
+  return true
+end
+
+return {
+  check = function()
+    vim.health.start 'kickstart.nvim'
+
+    vim.health.info [[NOTE: Not every warning is a 'must-fix' in `:checkhealth`
+
+  Fix only warnings for plugins and languages you intend to use.
+    Mason will give warnings for languages that are not installed.
+    You do not need to install, unless you want to use those languages!]]
+
+    local uv = vim.uv or vim.loop
+    vim.health.info('System Information: ' .. vim.inspect(uv.os_uname()))
+
+    check_version()
+    check_external_reqs()
+  end,
+}

archive/.config/nvim/lua/kickstart/plugins/autopairs.lua

@@ -0,0 +1,16 @@
+-- autopairs
+-- https://github.com/windwp/nvim-autopairs
+
+return {
+  'windwp/nvim-autopairs',
+  event = 'InsertEnter',
+  -- Optional dependency
+  dependencies = { 'hrsh7th/nvim-cmp' },
+  config = function()
+    require('nvim-autopairs').setup {}
+    -- If you want to automatically add `(` after selecting a function or method
+    local cmp_autopairs = require 'nvim-autopairs.completion.cmp'
+    local cmp = require 'cmp'
+    cmp.event:on('confirm_done', cmp_autopairs.on_confirm_done())
+  end,
+}

archive/.config/nvim/lua/kickstart/plugins/cmp.lua

@@ -0,0 +1,113 @@
+return {
+  { -- Autocompletion
+    'hrsh7th/nvim-cmp',
+    event = 'InsertEnter',
+    dependencies = {
+      -- Snippet Engine & its associated nvim-cmp source
+      {
+        'L3MON4D3/LuaSnip',
+        build = (function()
+          -- Build Step is needed for regex support in snippets.
+          -- This step is not supported in many windows environments.
+          -- Remove the below condition to re-enable on windows.
+          if vim.fn.has 'win32' == 1 or vim.fn.executable 'make' == 0 then
+            return
+          end
+          return 'make install_jsregexp'
+        end)(),
+        dependencies = {
+          -- `friendly-snippets` contains a variety of premade snippets.
+          --    See the README about individual language/framework/plugin snippets:
+          --    https://github.com/rafamadriz/friendly-snippets
+          -- {
+          --   'rafamadriz/friendly-snippets',
+          --   config = function()
+          --     require('luasnip.loaders.from_vscode').lazy_load()
+          --   end,
+          -- },
+        },
+      },
+      'saadparwaiz1/cmp_luasnip',
+
+      -- Adds other completion capabilities.
+      --  nvim-cmp does not ship with all sources by default. They are split
+      --  into multiple repos for maintenance purposes.
+      'hrsh7th/cmp-nvim-lsp',
+      'hrsh7th/cmp-path',
+    },
+    config = function()
+      -- See `:help cmp`
+      local cmp = require 'cmp'
+      local luasnip = require 'luasnip'
+      luasnip.config.setup {}
+
+      cmp.setup {
+        snippet = {
+          expand = function(args)
+            luasnip.lsp_expand(args.body)
+          end,
+        },
+        completion = { completeopt = 'menu,menuone,noinsert' },
+
+        -- For an understanding of why these mappings were
+        -- chosen, you will need to read `:help ins-completion`
+        --
+        -- No, but seriously. Please read `:help ins-completion`, it is really good!
+        mapping = cmp.mapping.preset.insert {
+          -- Select the [n]ext item
+          ['<C-n>'] = cmp.mapping.select_next_item(),
+          -- Select the [p]revious item
+          ['<C-p>'] = cmp.mapping.select_prev_item(),
+
+          -- Scroll the documentation window [b]ack / [f]orward
+          ['<C-b>'] = cmp.mapping.scroll_docs(-4),
+          ['<C-f>'] = cmp.mapping.scroll_docs(4),
+
+          -- Accept ([y]es) the completion.
+          --  This will auto-import if your LSP supports it.
+          --  This will expand snippets if the LSP sent a snippet.
+          -- ['<C-y>'] = cmp.mapping.confirm { select = true },
+
+          -- If you prefer more traditional completion keymaps,
+          -- you can uncomment the following lines
+          ['<CR>'] = cmp.mapping.confirm { select = true },
+          ['<Tab>'] = cmp.mapping.select_next_item(),
+          ['<S-Tab>'] = cmp.mapping.select_prev_item(),
+
+          -- Manually trigger a completion from nvim-cmp.
+          --  Generally you don't need this, because nvim-cmp will display
+          --  completions whenever it has completion options available.
+          ['<C-Space>'] = cmp.mapping.complete {},
+
+          -- Think of <c-l> as moving to the right of your snippet expansion.
+          --  So if you have a snippet that's like:
+          --  function $name($args)
+          --    $body
+          --  end
+          --
+          -- <c-l> will move you to the right of each of the expansion locations.
+          -- <c-h> is similar, except moving you backwards.
+          ['<C-l>'] = cmp.mapping(function()
+            if luasnip.expand_or_locally_jumpable() then
+              luasnip.expand_or_jump()
+            end
+          end, { 'i', 's' }),
+          ['<C-h>'] = cmp.mapping(function()
+            if luasnip.locally_jumpable(-1) then
+              luasnip.jump(-1)
+            end
+          end, { 'i', 's' }),
+
+          -- For more advanced Luasnip keymaps (e.g. selecting choice nodes, expansion) see:
+          --    https://github.com/L3MON4D3/LuaSnip?tab=readme-ov-file#keymaps
+        },
+        sources = {
+          { name = 'nvim_lsp' },
+          { name = 'luasnip' },
+          { name = 'path' },
+        },
+      }
+    end,
+  },
+}
+-- vim: ts=2 sts=2 sw=2 et

archive/.config/nvim/lua/kickstart/plugins/conform.lua

@@ -0,0 +1,41 @@
+return {
+  { -- Autoformat
+    'stevearc/conform.nvim',
+    lazy = false,
+    keys = {
+      {
+        '<leader>f',
+        function()
+          require('conform').format { async = true, lsp_fallback = true }
+        end,
+        mode = '',
+        desc = '[F]ormat buffer',
+      },
+    },
+    opts = {
+      notify_on_error = false,
+      format_on_save = function(bufnr)
+        -- Disable "format_on_save lsp_fallback" for languages that don't
+        -- have a well standardized coding style. You can add additional
+        -- languages here or re-enable it for the disabled ones.
+        local disable_filetypes = { c = true, cpp = true }
+        return {
+          timeout_ms = 500,
+          lsp_fallback = not disable_filetypes[vim.bo[bufnr].filetype],
+        }
+      end,
+      formatters_by_ft = {
+        lua = { 'stylua' },
+        go = { 'goimports', 'gofmt' },
+        html = { 'prettier' },
+        -- Conform can also run multiple formatters sequentially
+        -- python = { "isort", "black" },
+        --
+        -- You can use a sub-list to tell conform to run *until* a formatter
+        -- is found.
+        -- javascript = { { "prettierd", "prettier" } },
+      },
+    },
+  },
+}
+-- vim: ts=2 sts=2 sw=2 et

archive/.config/nvim/lua/kickstart/plugins/debug.lua

@@ -0,0 +1,97 @@
+-- debug.lua
+--
+-- Shows how to use the DAP plugin to debug your code.
+--
+-- Primarily focused on configuring the debugger for Go, but can
+-- be extended to other languages as well. That's why it's called
+-- kickstart.nvim and not kitchen-sink.nvim ;)
+
+return {
+  -- NOTE: Yes, you can install new plugins here!
+  'mfussenegger/nvim-dap',
+  -- NOTE: And you can specify dependencies as well
+  dependencies = {
+    -- Creates a beautiful debugger UI
+    'rcarriga/nvim-dap-ui',
+
+    -- Required dependency for nvim-dap-ui
+    'nvim-neotest/nvim-nio',
+
+    -- Installs the debug adapters for you
+    'williamboman/mason.nvim',
+    'jay-babu/mason-nvim-dap.nvim',
+
+    -- Add your own debuggers here
+    'leoluz/nvim-dap-go',
+  },
+  config = function()
+    local dap = require 'dap'
+    local dapui = require 'dapui'
+
+    require('mason-nvim-dap').setup {
+      -- Makes a best effort to setup the various debuggers with
+      -- reasonable debug configurations
+      automatic_installation = true,
+
+      -- You can provide additional configuration to the handlers,
+      -- see mason-nvim-dap README for more information
+      handlers = {},
+
+      -- You'll need to check that you have the required things installed
+      -- online, please don't ask me how to install them :)
+      ensure_installed = {
+        -- Update this to ensure that you have the debuggers for the langs you want
+        'delve',
+        'cpptools',
+      },
+    }
+
+    -- Basic debugging keymaps, feel free to change to your liking!
+    vim.keymap.set('n', '<F5>', dap.continue, { desc = 'Debug: Start/Continue' })
+    vim.keymap.set('n', '<F1>', dap.step_into, { desc = 'Debug: Step Into' })
+    vim.keymap.set('n', '<F2>', dap.step_over, { desc = 'Debug: Step Over' })
+    vim.keymap.set('n', '<F3>', dap.step_out, { desc = 'Debug: Step Out' })
+    vim.keymap.set('n', '<leader>b', dap.toggle_breakpoint, { desc = 'Debug: Toggle Breakpoint' })
+    vim.keymap.set('n', '<leader>B', function()
+      dap.set_breakpoint(vim.fn.input 'Breakpoint condition: ')
+    end, { desc = 'Debug: Set Breakpoint' })
+
+    -- Dap UI setup
+    -- For more information, see |:help nvim-dap-ui|
+    dapui.setup {
+      -- Set icons to characters that are more likely to work in every terminal.
+      --    Feel free to remove or use ones that you like more! :)
+      --    Don't feel like these are good choices.
+      icons = { expanded = '▾', collapsed = '▸', current_frame = '*' },
+      controls = {
+        icons = {
+          pause = '⏸',
+          play = '▶',
+          step_into = '⏎',
+          step_over = '⏭',
+          step_out = '⏮',
+          step_back = 'b',
+          run_last = '▶▶',
+          terminate = '⏹',
+          disconnect = '⏏',
+        },
+      },
+    }
+
+    -- Toggle to see last session result. Without this, you can't see session output in case of unhandled exception.
+    vim.keymap.set('n', '<F7>', dapui.toggle, { desc = 'Debug: See last session result.' })
+
+    dap.listeners.after.event_initialized['dapui_config'] = dapui.open
+    dap.listeners.before.event_terminated['dapui_config'] = dapui.close
+    dap.listeners.before.event_exited['dapui_config'] = dapui.close
+
+    -- Install golang specific config
+    require('dap-go').setup {
+      delve = {
+        -- On Windows delve must be run attached or it crashes.
+        -- See https://github.com/leoluz/nvim-dap-go/blob/main/README.md#configuring
+        detached = vim.fn.has 'win32' == 0,
+      },
+    }
+  end,
+}

archive/.config/nvim/lua/kickstart/plugins/gitsigns.lua

@@ -0,0 +1,70 @@
+-- Here is a more advanced example where we pass configuration
+-- options to `gitsigns.nvim`. This is equivalent to the following Lua:
+--    require('gitsigns').setup({ ... })
+--
+-- See `:help gitsigns` to understand what the configuration keys do
+return {
+  { -- Adds git related signs to the gutter, as well as utilities for managing changes
+    'lewis6991/gitsigns.nvim',
+    opts = {
+      signs = {
+        add = { text = '+' },
+        change = { text = '~' },
+        delete = { text = '_' },
+        topdelete = { text = '‾' },
+        changedelete = { text = '~' },
+      },
+      on_attach = function(bufnr)
+        local gitsigns = require 'gitsigns'
+
+        local function map(mode, l, r, opts)
+          opts = opts or {}
+          opts.buffer = bufnr
+          vim.keymap.set(mode, l, r, opts)
+        end
+
+        -- Navigation
+        map('n', ']c', function()
+          if vim.wo.diff then
+            vim.cmd.normal { ']c', bang = true }
+          else
+            gitsigns.nav_hunk 'next'
+          end
+        end, { desc = 'Jump to next git [c]hange' })
+
+        map('n', '[c', function()
+          if vim.wo.diff then
+            vim.cmd.normal { '[c', bang = true }
+          else
+            gitsigns.nav_hunk 'prev'
+          end
+        end, { desc = 'Jump to previous git [c]hange' })
+
+        -- Actions
+        -- visual mode
+        map('v', '<leader>hs', function()
+          gitsigns.stage_hunk { vim.fn.line '.', vim.fn.line 'v' }
+        end, { desc = 'stage git hunk' })
+        map('v', '<leader>hr', function()
+          gitsigns.reset_hunk { vim.fn.line '.', vim.fn.line 'v' }
+        end, { desc = 'reset git hunk' })
+        -- normal mode
+        map('n', '<leader>hs', gitsigns.stage_hunk, { desc = 'git [s]tage hunk' })
+        map('n', '<leader>hr', gitsigns.reset_hunk, { desc = 'git [r]eset hunk' })
+        map('n', '<leader>hS', gitsigns.stage_buffer, { desc = 'git [S]tage buffer' })
+        map('n', '<leader>hu', gitsigns.undo_stage_hunk, { desc = 'git [u]ndo stage hunk' })
+        map('n', '<leader>hR', gitsigns.reset_buffer, { desc = 'git [R]eset buffer' })
+        map('n', '<leader>hp', gitsigns.preview_hunk, { desc = 'git [p]review hunk' })
+        map('n', '<leader>hb', gitsigns.blame_line, { desc = 'git [b]lame line' })
+        map('n', '<leader>hd', gitsigns.diffthis, { desc = 'git [d]iff against index' })
+        map('n', '<leader>hD', function()
+          gitsigns.diffthis '@'
+        end, { desc = 'git [D]iff against last commit' })
+        -- Toggles
+        map('n', '<leader>tb', gitsigns.toggle_current_line_blame, { desc = '[T]oggle git show [b]lame line' })
+        map('n', '<leader>tD', gitsigns.toggle_deleted, { desc = '[T]oggle git show [D]eleted' })
+      end,
+    },
+  },
+}
+-- vim: ts=2 sts=2 sw=2 et

archive/.config/nvim/lua/kickstart/plugins/indent_line.lua

@@ -0,0 +1,9 @@
+return {
+  { -- Add indentation guides even on blank lines
+    'lukas-reineke/indent-blankline.nvim',
+    -- Enable `lukas-reineke/indent-blankline.nvim`
+    -- See `:help ibl`
+    main = 'ibl',
+    opts = {},
+  },
+}

archive/.config/nvim/lua/kickstart/plugins/lint.lua

@@ -0,0 +1,57 @@
+return {
+
+  { -- Linting
+    'mfussenegger/nvim-lint',
+    event = { 'BufReadPre', 'BufNewFile' },
+    config = function()
+      local lint = require 'lint'
+      lint.linters_by_ft = {
+        markdown = { 'markdownlint' },
+        yaml = { 'yamllint' },
+        cmake = { 'cmakelint' },
+      }
+
+      -- To allow other plugins to add linters to require('lint').linters_by_ft,
+      -- instead set linters_by_ft like this:
+      -- lint.linters_by_ft = lint.linters_by_ft or {}
+      -- lint.linters_by_ft['markdown'] = { 'markdownlint' }
+      --
+      -- However, note that this will enable a set of default linters,
+      -- which will cause errors unless these tools are available:
+      -- {
+      --   clojure = { "clj-kondo" },
+      --   dockerfile = { "hadolint" },
+      --   inko = { "inko" },
+      --   janet = { "janet" },
+      --   json = { "jsonlint" },
+      --   markdown = { "vale" },
+      --   rst = { "vale" },
+      --   ruby = { "ruby" },
+      --   terraform = { "tflint" },
+      --   text = { "vale" }
+      -- }
+      --
+      -- You can disable the default linters by setting their filetypes to nil:
+      -- lint.linters_by_ft['clojure'] = nil
+      -- lint.linters_by_ft['dockerfile'] = nil
+      -- lint.linters_by_ft['inko'] = nil
+      -- lint.linters_by_ft['janet'] = nil
+      -- lint.linters_by_ft['json'] = nil
+      -- lint.linters_by_ft['markdown'] = nil
+      -- lint.linters_by_ft['rst'] = nil
+      -- lint.linters_by_ft['ruby'] = nil
+      -- lint.linters_by_ft['terraform'] = nil
+      -- lint.linters_by_ft['text'] = nil
+
+      -- Create autocommand which carries out the actual linting
+      -- on the specified events.
+      local lint_augroup = vim.api.nvim_create_augroup('lint', { clear = true })
+      vim.api.nvim_create_autocmd({ 'BufEnter', 'BufWritePost', 'InsertLeave' }, {
+        group = lint_augroup,
+        callback = function()
+          require('lint').try_lint()
+        end,
+      })
+    end,
+  },
+}

archive/.config/nvim/lua/kickstart/plugins/lspconfig.lua

@@ -0,0 +1,235 @@
+return {
+  { -- LSP Configuration & Plugins
+    'neovim/nvim-lspconfig',
+    dependencies = {
+      -- Automatically install LSPs and related tools to stdpath for Neovim
+      { 'williamboman/mason.nvim', config = true }, -- NOTE: Must be loaded before dependants
+      'williamboman/mason-lspconfig.nvim',
+      'WhoIsSethDaniel/mason-tool-installer.nvim',
+
+      -- Useful status updates for LSP.
+      -- NOTE: `opts = {}` is the same as calling `require('fidget').setup({})`
+      { 'j-hui/fidget.nvim', opts = {} },
+
+      -- `neodev` configures Lua LSP for your Neovim config, runtime and plugins
+      -- used for completion, annotations and signatures of Neovim apis
+      { 'folke/neodev.nvim', opts = {} },
+    },
+    config = function()
+      -- Brief aside: **What is LSP?**
+      --
+      -- LSP is an initialism you've probably heard, but might not understand what it is.
+      --
+      -- LSP stands for Language Server Protocol. It's a protocol that helps editors
+      -- and language tooling communicate in a standardized fashion.
+      --
+      -- In general, you have a "server" which is some tool built to understand a particular
+      -- language (such as `gopls`, `lua_ls`, `rust_analyzer`, etc.). These Language Servers
+      -- (sometimes called LSP servers, but that's kind of like ATM Machine) are standalone
+      -- processes that communicate with some "client" - in this case, Neovim!
+      --
+      -- LSP provides Neovim with features like:
+      --  - Go to definition
+      --  - Find references
+      --  - Autocompletion
+      --  - Symbol Search
+      --  - and more!
+      --
+      -- Thus, Language Servers are external tools that must be installed separately from
+      -- Neovim. This is where `mason` and related plugins come into play.
+      --
+      -- If you're wondering about lsp vs treesitter, you can check out the wonderfully
+      -- and elegantly composed help section, `:help lsp-vs-treesitter`
+
+      --  This function gets run when an LSP attaches to a particular buffer.
+      --    That is to say, every time a new file is opened that is associated with
+      --    an lsp (for example, opening `main.rs` is associated with `rust_analyzer`) this
+      --    function will be executed to configure the current buffer
+      vim.api.nvim_create_autocmd('LspAttach', {
+        group = vim.api.nvim_create_augroup('kickstart-lsp-attach', { clear = true }),
+        callback = function(event)
+          -- NOTE: Remember that Lua is a real programming language, and as such it is possible
+          -- to define small helper and utility functions so you don't have to repeat yourself.
+          --
+          -- In this case, we create a function that lets us more easily define mappings specific
+          -- for LSP related items. It sets the mode, buffer and description for us each time.
+          local map = function(keys, func, desc)
+            vim.keymap.set('n', keys, func, { buffer = event.buf, desc = 'LSP: ' .. desc })
+          end
+
+          -- Jump to the definition of the word under your cursor.
+          --  This is where a variable was first declared, or where a function is defined, etc.
+          --  To jump back, press <C-t>.
+          map('gd', require('telescope.builtin').lsp_definitions, '[G]oto [D]efinition')
+
+          -- Find references for the word under your cursor.
+          map('gr', require('telescope.builtin').lsp_references, '[G]oto [R]eferences')
+
+          -- Jump to the implementation of the word under your cursor.
+          --  Useful when your language has ways of declaring types without an actual implementation.
+          map('gI', require('telescope.builtin').lsp_implementations, '[G]oto [I]mplementation')
+
+          -- Jump to the type of the word under your cursor.
+          --  Useful when you're not sure what type a variable is and you want to see
+          --  the definition of its *type*, not where it was *defined*.
+          map('<leader>D', require('telescope.builtin').lsp_type_definitions, 'Type [D]efinition')
+
+          -- Fuzzy find all the symbols in your current document.
+          --  Symbols are things like variables, functions, types, etc.
+          map('<leader>ds', require('telescope.builtin').lsp_document_symbols, '[D]ocument [S]ymbols')
+
+          -- Fuzzy find all the symbols in your current workspace.
+          --  Similar to document symbols, except searches over your entire project.
+          map('<leader>ws', require('telescope.builtin').lsp_dynamic_workspace_symbols, '[W]orkspace [S]ymbols')
+
+          -- Rename the variable under your cursor.
+          --  Most Language Servers support renaming across files, etc.
+          map('<leader>rn', vim.lsp.buf.rename, '[R]e[n]ame')
+
+          -- Execute a code action, usually your cursor needs to be on top of an error
+          -- or a suggestion from your LSP for this to activate.
+          map('<leader>ca', vim.lsp.buf.code_action, '[C]ode [A]ction')
+
+          -- Opens a popup that displays documentation about the word under your cursor
+          --  See `:help K` for why this keymap.
+          map('K', vim.lsp.buf.hover, 'Hover Documentation')
+
+          -- WARN: This is not Goto Definition, this is Goto Declaration.
+          --  For example, in C this would take you to the header.
+          map('gD', vim.lsp.buf.declaration, '[G]oto [D]eclaration')
+
+          -- The following two autocommands are used to highlight references of the
+          -- word under your cursor when your cursor rests there for a little while.
+          --    See `:help CursorHold` for information about when this is executed
+          --
+          -- When you move your cursor, the highlights will be cleared (the second autocommand).
+          local client = vim.lsp.get_client_by_id(event.data.client_id)
+          if client and client.server_capabilities.documentHighlightProvider then
+            local highlight_augroup = vim.api.nvim_create_augroup('kickstart-lsp-highlight', { clear = false })
+            vim.api.nvim_create_autocmd({ 'CursorHold', 'CursorHoldI' }, {
+              buffer = event.buf,
+              group = highlight_augroup,
+              callback = vim.lsp.buf.document_highlight,
+            })
+
+            vim.api.nvim_create_autocmd({ 'CursorMoved', 'CursorMovedI' }, {
+              buffer = event.buf,
+              group = highlight_augroup,
+              callback = vim.lsp.buf.clear_references,
+            })
+
+            vim.api.nvim_create_autocmd('LspDetach', {
+              group = vim.api.nvim_create_augroup('kickstart-lsp-detach', { clear = true }),
+              callback = function(event2)
+                vim.lsp.buf.clear_references()
+                vim.api.nvim_clear_autocmds { group = 'kickstart-lsp-highlight', buffer = event2.buf }
+              end,
+            })
+          end
+
+          -- The following autocommand is used to enable inlay hints in your
+          -- code, if the language server you are using supports them
+          --
+          -- This may be unwanted, since they displace some of your code
+          if client and client.server_capabilities.inlayHintProvider and vim.lsp.inlay_hint then
+            map('<leader>th', function()
+              vim.lsp.inlay_hint.enable(not vim.lsp.inlay_hint.is_enabled())
+            end, '[T]oggle Inlay [H]ints')
+          end
+        end,
+      })
+
+      -- LSP servers and clients are able to communicate to each other what features they support.
+      --  By default, Neovim doesn't support everything that is in the LSP specification.
+      --  When you add nvim-cmp, luasnip, etc. Neovim now has *more* capabilities.
+      --  So, we create new capabilities with nvim cmp, and then broadcast that to the servers.
+      local capabilities = vim.lsp.protocol.make_client_capabilities()
+      capabilities = vim.tbl_deep_extend('force', capabilities, require('cmp_nvim_lsp').default_capabilities())
+
+      -- Enable the following language servers
+      --  Feel free to add/remove any LSPs that you want here. They will automatically be installed.
+      --
+      --  Add any additional override configuration in the following tables. Available keys are:
+      --  - cmd (table): Override the default command used to start the server
+      --  - filetypes (table): Override the default list of associated filetypes for the server
+      --  - capabilities (table): Override fields in capabilities. Can be used to disable certain LSP features.
+      --  - settings (table): Override the default settings passed when initializing the server.
+      --        For example, to see the options for `lua_ls`, you could go to: https://luals.github.io/wiki/settings/
+      local servers = {
+        clangd = {},
+        gopls = {},
+        elmls = {},
+        bashls = {},
+        jsonls = {},
+        dockerls = {},
+        marksman = {},
+        harper_ls = {
+          filetypes = {
+            'c',
+            'markdown',
+            'cpp',
+            'go',
+            'toml',
+            'yaml',
+          },
+        },
+        -- html = {},
+        -- pyright = {},
+        rust_analyzer = {},
+        -- ... etc. See `:help lspconfig-all` for a list of all the pre-configured LSPs
+        --
+        -- Some languages (like typescript) have entire language plugins that can be useful:
+        --    https://github.com/pmizio/typescript-tools.nvim
+        --
+        -- But for many setups, the LSP (`tsserver`) will work just fine
+        -- tsserver = {},
+        --
+
+        lua_ls = {
+          -- cmd = {...},
+          -- filetypes = { ...},
+          -- capabilities = {},
+          settings = {
+            Lua = {
+              completion = {
+                callSnippet = 'Replace',
+              },
+              -- You can toggle below to ignore Lua_LS's noisy `missing-fields` warnings
+              -- diagnostics = { disable = { 'missing-fields' } },
+            },
+          },
+        },
+      }
+
+      -- Ensure the servers and tools above are installed
+      --  To check the current status of installed tools and/or manually install
+      --  other tools, you can run
+      --    :Mason
+      --
+      --  You can press `g?` for help in this menu.
+      require('mason').setup()
+
+      -- You can add other tools here that you want Mason to install
+      -- for you, so that they are available from within Neovim.
+      local ensure_installed = vim.tbl_keys(servers or {})
+      vim.list_extend(ensure_installed, {
+        'stylua', -- Used to format Lua code
+      })
+      require('mason-tool-installer').setup { ensure_installed = ensure_installed }
+
+      require('mason-lspconfig').setup {
+        handlers = {
+          function(server_name)
+            local server = servers[server_name] or {}
+            -- This handles overriding only values explicitly passed
+            -- by the server configuration above. Useful when disabling
+            -- certain features of an LSP (for example, turning off formatting for tsserver)
+            server.capabilities = vim.tbl_deep_extend('force', {}, capabilities, server.capabilities or {})
+            require('lspconfig')[server_name].setup(server)
+          end,
+        },
+      }
+    end,
+  },
+}
+-- vim: ts=2 sts=2 sw=2 et

archive/.config/nvim/lua/kickstart/plugins/mini.lua

@@ -0,0 +1,43 @@
+return {
+  { -- Collection of various small independent plugins/modules
+    'echasnovski/mini.nvim',
+    config = function()
+      -- Better Around/Inside textobjects
+      --
+      -- Examples:
+      --  - va)  - [V]isually select [A]round [)]paren
+      --  - yinq - [Y]ank [I]nside [N]ext [']quote
+      --  - ci'  - [C]hange [I]nside [']quote
+      require('mini.ai').setup { n_lines = 500 }
+
+      -- Add/delete/replace surroundings (brackets, quotes, etc.)
+      --
+      -- - saiw) - [S]urround [A]dd [I]nner [W]ord [)]Paren
+      -- - sd'   - [S]urround [D]elete [']quotes
+      -- - sr)'  - [S]urround [R]eplace [)] [']
+      require('mini.surround').setup()
+
+      -- Simple and easy statusline.
+      --  You could remove this setup call if you don't like it,
+      --  and try some other statusline plugin
+      local statusline = require 'mini.statusline'
+      -- set use_icons to true if you have a Nerd Font
+      statusline.setup { use_icons = vim.g.have_nerd_font }
+
+      -- You can configure sections in the statusline by overriding their
+      -- default behavior. For example, here we set the section for
+      -- cursor location to LINE:COLUMN
+      ---@diagnostic disable-next-line: duplicate-set-field
+      statusline.section_location = function()
+        return '%2l:%-2v'
+      end
+
+      -- ... and there is more!
+      --  Check out: https://github.com/echasnovski/mini.nvim
+
+      -- Enable tabline
+      -- require('mini.tabline').setup()
+    end,
+  },
+}
+-- vim: ts=2 sts=2 sw=2 et

archive/.config/nvim/lua/kickstart/plugins/neo-tree.lua

@@ -0,0 +1,38 @@
+-- Neo-tree is a Neovim plugin to browse the file system
+-- https://github.com/nvim-neo-tree/neo-tree.nvim
+
+return {
+  'nvim-neo-tree/neo-tree.nvim',
+  version = '*',
+  dependencies = {
+    'nvim-lua/plenary.nvim',
+    'nvim-tree/nvim-web-devicons', -- not strictly required, but recommended
+    'MunifTanjim/nui.nvim',
+  },
+  cmd = 'Neotree',
+  keys = {
+    { '\\', ':Neotree reveal<CR>', { desc = 'NeoTree reveal' } },
+  },
+  opts = {
+    filesystem = {
+      window = {
+        mappings = {
+          ['\\'] = 'close_window',
+        },
+        position = 'right',
+      },
+      filtered_items = {
+        visible = true,
+        show_dotfiles = false,
+        show_hidden_count = true,
+        hide_gitignored = true,
+        hide_by_name = {
+          -- '.git',
+        },
+        never_show = {
+          '.git',
+        },
+      },
+    },
+  },
+}

archive/.config/nvim/lua/kickstart/plugins/telescope.lua

@@ -0,0 +1,114 @@
+-- NOTE: Plugins can specify dependencies.
+--
+-- The dependencies are proper plugin specifications as well - anything
+-- you do for a plugin at the top level, you can do for a dependency.
+--
+-- Use the `dependencies` key to specify the dependencies of a particular plugin
+
+return {
+  { -- Fuzzy Finder (files, lsp, etc)
+    'nvim-telescope/telescope.nvim',
+    event = 'VimEnter',
+    branch = '0.1.x',
+    dependencies = {
+      'nvim-lua/plenary.nvim',
+      { -- If encountering errors, see telescope-fzf-native README for installation instructions
+        'nvim-telescope/telescope-fzf-native.nvim',
+
+        -- `build` is used to run some command when the plugin is installed/updated.
+        -- This is only run then, not every time Neovim starts up.
+        build = 'make',
+
+        -- `cond` is a condition used to determine whether this plugin should be
+        -- installed and loaded.
+        cond = function()
+          return vim.fn.executable 'make' == 1
+        end,
+      },
+      { 'nvim-telescope/telescope-ui-select.nvim' },
+
+      -- Useful for getting pretty icons, but requires a Nerd Font.
+      { 'nvim-tree/nvim-web-devicons', enabled = vim.g.have_nerd_font },
+    },
+    config = function()
+      -- Telescope is a fuzzy finder that comes with a lot of different things that
+      -- it can fuzzy find! It's more than just a "file finder", it can search
+      -- many different aspects of Neovim, your workspace, LSP, and more!
+      --
+      -- The easiest way to use Telescope, is to start by doing something like:
+      --  :Telescope help_tags
+      --
+      -- After running this command, a window will open up and you're able to
+      -- type in the prompt window. You'll see a list of `help_tags` options and
+      -- a corresponding preview of the help.
+      --
+      -- Two important keymaps to use while in Telescope are:
+      --  - Insert mode: <c-/>
+      --  - Normal mode: ?
+      --
+      -- This opens a window that shows you all of the keymaps for the current
+      -- Telescope picker. This is really useful to discover what Telescope can
+      -- do as well as how to actually do it!
+
+      -- [[ Configure Telescope ]]
+      -- See `:help telescope` and `:help telescope.setup()`
+      require('telescope').setup {
+        -- You can put your default mappings / updates / etc. in here
+        --  All the info you're looking for is in `:help telescope.setup()`
+        --
+        -- defaults = {
+        --   mappings = {
+        --     i = { ['<c-enter>'] = 'to_fuzzy_refine' },
+        --   },
+        -- },
+        -- pickers = {}
+        extensions = {
+          ['ui-select'] = {
+            require('telescope.themes').get_dropdown(),
+          },
+        },
+      }
+
+      -- Enable Telescope extensions if they are installed
+      pcall(require('telescope').load_extension, 'fzf')
+      pcall(require('telescope').load_extension, 'ui-select')
+
+      -- See `:help telescope.builtin`
+      local builtin = require 'telescope.builtin'
+      vim.keymap.set('n', '<leader>sh', builtin.help_tags, { desc = '[S]earch [H]elp' })
+      vim.keymap.set('n', '<leader>sk', builtin.keymaps, { desc = '[S]earch [K]eymaps' })
+      vim.keymap.set('n', '<leader>sf', builtin.find_files, { desc = '[S]earch [F]iles' })
+      vim.keymap.set('n', '<leader>ss', builtin.builtin, { desc = '[S]earch [S]elect Telescope' })
+      vim.keymap.set('n', '<leader>sw', builtin.grep_string, { desc = '[S]earch current [W]ord' })
+      vim.keymap.set('n', '<leader>sg', builtin.live_grep, { desc = '[S]earch by [G]rep' })
+      vim.keymap.set('n', '<leader>sd', builtin.diagnostics, { desc = '[S]earch [D]iagnostics' })
+      vim.keymap.set('n', '<leader>sr', builtin.resume, { desc = '[S]earch [R]esume' })
+      vim.keymap.set('n', '<leader>s.', builtin.oldfiles, { desc = '[S]earch Recent Files ("." for repeat)' })
+      vim.keymap.set('n', '<leader><leader>', builtin.buffers, { desc = '[ ] Find existing buffers' })
+
+      -- Slightly advanced example of overriding default behavior and theme
+      vim.keymap.set('n', '<leader>/', function()
+        -- You can pass additional configuration to Telescope to change the theme, layout, etc.
+        builtin.current_buffer_fuzzy_find(require('telescope.themes').get_dropdown {
+          winblend = 10,
+          previewer = false,
+        })
+      end, { desc = '[/] Fuzzily search in current buffer' })
+
+      -- It's also possible to pass additional configuration options.
+      --  See `:help telescope.builtin.live_grep()` for information about particular keys
+      vim.keymap.set('n', '<leader>s/', function()
+        builtin.live_grep {
+          grep_open_files = true,
+          prompt_title = 'Live Grep in Open Files',
+        }
+      end, { desc = '[S]earch [/] in Open Files' })
+
+      -- Shortcut for searching your Neovim configuration files
+      vim.keymap.set('n', '<leader>sn', function()
+        builtin.find_files { cwd = vim.fn.stdpath 'config' }
+      end, { desc = '[S]earch [N]eovim files' })
+    end,
+  },
+}
+-- vim: ts=2 sts=2 sw=2 et

archive/.config/nvim/lua/kickstart/plugins/todo-comments.lua

@@ -0,0 +1,5 @@
+-- Highlight todo, notes, etc in comments
+return {
+  { 'folke/todo-comments.nvim', event = 'VimEnter', dependencies = { 'nvim-lua/plenary.nvim' }, opts = { signs = false } },
+}
+-- vim: ts=2 sts=2 sw=2 et

archive/.config/nvim/lua/kickstart/plugins/treesitter.lua

@@ -0,0 +1,35 @@
+return {
+  { -- Highlight, edit, and navigate code
+    'nvim-treesitter/nvim-treesitter',
+    build = ':TSUpdate',
+    opts = {
+      ensure_installed = { 'bash', 'c', 'diff', 'html', 'lua', 'luadoc', 'markdown', 'vim', 'vimdoc' },
+      -- Autoinstall languages that are not installed
+      auto_install = true,
+      highlight = {
+        enable = true,
+        -- Some languages depend on vim's regex highlighting system (such as Ruby) for indent rules.
+        --  If you are experiencing weird indenting issues, add the language to
+        --  the list of additional_vim_regex_highlighting and disabled languages for indent.
+        additional_vim_regex_highlighting = { 'ruby' },
+      },
+      indent = { enable = true, disable = { 'ruby' } },
+    },
+    config = function(_, opts)
+      -- [[ Configure Treesitter ]] See `:help nvim-treesitter`
+
+      -- Prefer git instead of curl in order to improve connectivity in some environments
+      require('nvim-treesitter.install').prefer_git = true
+      ---@diagnostic disable-next-line: missing-fields
+      require('nvim-treesitter.configs').setup(opts)
+
+      -- There are additional nvim-treesitter modules that you can use to interact
+      -- with nvim-treesitter. You should go explore a few and see what interests you:
+      --
+      --    - Incremental selection: Included, see `:help nvim-treesitter-incremental-selection-mod`
+      --    - Show your current context: https://github.com/nvim-treesitter/nvim-treesitter-context
+      --    - Treesitter + textobjects: https://github.com/nvim-treesitter/nvim-treesitter-textobjects
+    end,
+  },
+}
+-- vim: ts=2 sts=2 sw=2 et

archive/.config/nvim/lua/kickstart/plugins/which-key.lua

@@ -0,0 +1,46 @@
+-- NOTE: Plugins can also be configured to run Lua code when they are loaded.
+--
+-- This is often very useful to both group configuration, as well as handle
+-- lazy loading plugins that don't need to be loaded immediately at startup.
+--
+-- For example, in the following configuration, we use:
+--  event = 'VimEnter'
+--
+-- which loads which-key before all the UI elements are loaded. Events can be
+-- normal autocommands events (`:help autocmd-events`).
+--
+-- Then, because we use the `config` key, the configuration only runs
+-- after the plugin has been loaded:
+--  config = function() ... end
+
+return {
+  { -- Useful plugin to show you pending keybinds.
+    'folke/which-key.nvim',
+    event = 'VimEnter', -- Sets the loading event to 'VimEnter'
+    opts = {
+      preset = 'modern',
+      icons = {
+        mappings = false,
+      },
+    },
+    config = function() -- This is the function that runs, AFTER loading
+      require('which-key').setup()
+
+      -- Document existing key chains
+      require('which-key').add {
+        { '<leader>c', desc = '[C]ode' },
+        { '<leader>d', desc = '[D]ocument' },
+        { '<leader>r', desc = '[R]ename' },
+        { '<leader>s', desc = '[S]earch' },
+        { '<leader>w', desc = '[W]orkspace' },
+        { '<leader>t', desc = '[T]oggle' },
+        { '<leader>h', desc = 'Git [H]unk' },
+        {
+          mode = { 'v' },
+          { '<leader>h', desc = 'Git [H]unk' },
+        },
+      }
+    end,
+  },
+}
+-- vim: ts=2 sts=2 sw=2 et

archive/.config/nvim/lua/lazy-bootstrap.lua

@@ -0,0 +1,10 @@
+-- [[ Install `lazy.nvim` plugin manager ]]
+--    See `:help lazy.nvim.txt` or https://github.com/folke/lazy.nvim for more info
+local lazypath = vim.fn.stdpath 'data' .. '/lazy/lazy.nvim'
+if not vim.loop.fs_stat(lazypath) then
+  local lazyrepo = 'https://github.com/folke/lazy.nvim.git'
+  vim.fn.system { 'git', 'clone', '--filter=blob:none', '--branch=stable', lazyrepo, lazypath }
+end ---@diagnostic disable-next-line: undefined-field
+vim.opt.rtp:prepend(lazypath)
+
+-- vim: ts=2 sts=2 sw=2 et

archive/.config/nvim/lua/lazy-plugins.lua

@@ -0,0 +1,92 @@
+-- [[ Configure and install plugins ]]
+--
+--  To check the current status of your plugins, run
+--    :Lazy
+--
+--  You can press `?` in this menu for help. Use `:q` to close the window
+--
+--  To update plugins you can run
+--    :Lazy update
+--
+-- NOTE: Here is where you install your plugins.
+require('lazy').setup({
+  -- NOTE: Plugins can be added with a link (or for a github repo: 'owner/repo' link).
+  'tpope/vim-sleuth', -- Detect tabstop and shiftwidth automatically
+
+  -- NOTE: Plugins can also be added by using a table,
+  -- with the first argument being the link and the following
+  -- keys can be used to configure plugin behavior/loading/etc.
+  --
+  -- Use `opts = {}` to force a plugin to be loaded.
+  --
+  --  This is equivalent to:
+  --    require('Comment').setup({})
+
+  -- "gc" to comment visual regions/lines
+  { 'numToStr/Comment.nvim', opts = {} },
+
+  -- modular approach: using `require 'path/name'` will
+  -- include a plugin definition from file lua/path/name.lua
+
+  require 'kickstart/plugins/gitsigns',
+
+  require 'kickstart/plugins/which-key',
+
+  require 'kickstart/plugins/telescope',
+
+  require 'kickstart/plugins/lspconfig',
+
+  require 'kickstart/plugins/conform',
+
+  require 'kickstart/plugins/cmp',
+
+  require 'kickstart/plugins/todo-comments',
+
+  require 'kickstart/plugins/mini',
+
+  require 'kickstart/plugins/treesitter',
+
+  -- The following two comments only work if you have downloaded the kickstart repo, not just copy pasted the
+  -- init.lua. If you want these files, they are in the repository, so you can just download them and
+  -- place them in the correct locations.
+
+  -- NOTE: Next step on your Neovim journey: Add/Configure additional plugins for Kickstart
+  --
+  --  Here are some example plugins that I've included in the Kickstart repository.
+  --  Uncomment any of the lines below to enable them (you will need to restart nvim).
+  --
+  require 'kickstart.plugins.debug',
+  require 'kickstart.plugins.indent_line',
+  require 'kickstart.plugins.lint',
+  require 'kickstart.plugins.autopairs',
+  require 'kickstart.plugins.neo-tree',
+
+  -- NOTE: The import below can automatically add your own plugins, configuration, etc from `lua/custom/plugins/*.lua`
+  --    This is the easiest way to modularize your config.
+  --
+  --  Uncomment the following line and add your plugins to `lua/custom/plugins/*.lua` to get going.
+  --    For additional information, see `:help lazy.nvim-lazy.nvim-structuring-your-plugins`
+  { import = 'custom.plugins' },
+}, {
+  ui = {
+    -- If you are using a Nerd Font: set icons to an empty table which will use the
+    -- default lazy.nvim defined Nerd Font icons, otherwise define a unicode icons table
+    icons = vim.g.have_nerd_font and {} or {
+      cmd = '⌘',
+      config = '🛠',
+      event = '📅',
+      ft = '📂',
+      init = '⚙',
+      keys = '🗝',
+      plugin = '🔌',
+      runtime = '💻',
+      require = '🌙',
+      source = '📄',
+      start = '🚀',
+      task = '📌',
+      lazy = '💤 ',
+    },
+  },
+})
+
+-- vim: ts=2 sts=2 sw=2 et

archive/.config/nvim/lua/options.lua

@@ -0,0 +1,67 @@
+-- [[ Setting options ]]
+-- See `:help vim.opt`
+-- NOTE: You can change these options as you wish!
+--  For more options, you can see `:help option-list`
+
+-- Make line numbers default
+vim.opt.number = true
+-- You can also add relative line numbers, to help with jumping.
+--  Experiment for yourself to see if you like it!
+-- vim.opt.relativenumber = true
+
+-- Enable mouse mode, can be useful for resizing splits for example!
+vim.opt.mouse = 'a'
+
+-- Don't show the mode, since it's already in the status line
+vim.opt.showmode = false
+
+-- Sync clipboard between OS and Neovim.
+--  Remove this option if you want your OS clipboard to remain independent.
+--  See `:help 'clipboard'`
+vim.opt.clipboard = 'unnamedplus'
+
+-- Enable break indent
+vim.opt.breakindent = true
+
+-- Save undo history
+vim.opt.undofile = true
+
+-- Case-insensitive searching UNLESS \C or one or more capital letters in the search term
+vim.opt.ignorecase = true
+vim.opt.smartcase = true
+
+-- Keep signcolumn on by default
+vim.opt.signcolumn = 'yes'
+
+-- Decrease update time
+vim.opt.updatetime = 250
+
+-- Decrease mapped sequence wait time
+-- Displays which-key popup sooner
+vim.opt.timeoutlen = 300
+
+-- Configure how new splits should be opened
+vim.opt.splitright = true
+vim.opt.splitbelow = true
+
+-- Sets how neovim will display certain whitespace characters in the editor.
+--  See `:help 'list'`
+--  and `:help 'listchars'`
+vim.opt.list = true
+vim.opt.listchars = { tab = '» ', trail = '·', nbsp = '␣' }
+
+-- Preview substitutions live, as you type!
+vim.opt.inccommand = 'split'
+
+-- Show which line your cursor is on
+vim.opt.cursorline = true
+
+-- Minimal number of screen lines to keep above and below the cursor.
+vim.opt.scrolloff = 10
+
+-- Set tabstop
+vim.opt.tabstop = 4
+vim.opt.shiftwidth = 4
+vim.opt.expandtab = true
+
+-- vim: ts=2 sts=2 sw=2 et

archive/.config/rofi/config.rasi

@@ -0,0 +1,154 @@
+configuration {
+/*	modes: "window,drun,run,ssh";*/
+    font: "Monaspace Radon 13";
+/*	location: 0;*/
+/*	yoffset: 0;*/
+/*	xoffset: 0;*/
+/*	fixed-num-lines: true;*/
+ 	show-icons: true;
+/*	terminal: "rofi-sensible-terminal";*/
+/*	ssh-client: "ssh";*/
+/*	ssh-command: "{terminal} -e {ssh-client} {host} [-p {port}]";*/
+/*	run-command: "{cmd}";*/
+/*	run-list-command: "";*/
+/*	run-shell-command: "{terminal} -e {cmd}";*/
+/*	window-command: "wmctrl -i -R {window}";*/
+/*	window-match-fields: "all";*/
+/*	icon-theme: ;*/
+/*	drun-match-fields: "name,generic,exec,categories,keywords";*/
+/*	drun-categories: ;*/
+/*	drun-show-actions: false;*/
+/*	drun-display-format: "{name} [<span weight='light' size='small'><i>({generic})</i></span>]";*/
+/*	drun-url-launcher: "xdg-open";*/
+/*	disable-history: false;*/
+/*	ignored-prefixes: "";*/
+/*	sort: false;*/
+/*	sorting-method: "normal";*/
+/*	case-sensitive: false;*/
+/*	cycle: true;*/
+/*	sidebar-mode: false;*/
+/*	hover-select: false;*/
+/*	eh: 1;*/
+/*	auto-select: false;*/
+/*	parse-hosts: false;*/
+/*	parse-known-hosts: true;*/
+/*	combi-modes: "window,run";*/
+/*	matching: "normal";*/
+/*	tokenize: true;*/
+/*	m: "-5";*/
+/*	filter: ;*/
+/*	dpi: -1;*/
+/*	threads: 0;*/
+/*	scroll-method: 0;*/
+/*	window-format: "{w}    {c}   {t}";*/
+/*	click-to-exit: true;*/
+/*	max-history-size: 25;*/
+/*	combi-hide-mode-prefix: false;*/
+/*	combi-display-format: "{mode} {text}";*/
+/*	matching-negate-char: '-' /* unsupported */;*/
+/*	cache-dir: ;*/
+/*	window-thumbnail: false;*/
+/*	drun-use-desktop-cache: false;*/
+/*	drun-reload-desktop-cache: false;*/
+/*	normalize-match: false;*/
+/*	steal-focus: false;*/
+/*	application-fallback-icon: ;*/
+/*	refilter-timeout-limit: 8192;*/
+/*	xserver-i300-workaround: false;*/
+/*	pid: "/run/user/1000/rofi.pid";*/
+/*	display-window: ;*/
+/*	display-windowcd: ;*/
+/*	display-run: ;*/
+/*	display-ssh: ;*/
+/*	display-drun: ;*/
+/*	display-combi: ;*/
+/*	display-keys: ;*/
+/*	display-filebrowser: ;*/
+/*	kb-primary-paste: "Control+V,Shift+Insert";*/
+/*	kb-secondary-paste: "Control+v,Insert";*/
+/*	kb-clear-line: "Control+w";*/
+/*	kb-move-front: "Control+a";*/
+/*	kb-move-end: "Control+e";*/
+/*	kb-move-word-back: "Alt+b,Control+Left";*/
+/*	kb-move-word-forward: "Alt+f,Control+Right";*/
+/*	kb-move-char-back: "Left,Control+b";*/
+/*	kb-move-char-forward: "Right,Control+f";*/
+/*	kb-remove-word-back: "Control+Alt+h,Control+BackSpace";*/
+/*	kb-remove-word-forward: "Control+Alt+d";*/
+/*	kb-remove-char-forward: "Delete,Control+d";*/
+/*	kb-remove-char-back: "BackSpace,Shift+BackSpace,Control+h";*/
+/*	kb-remove-to-eol: "Control+k";*/
+/*	kb-remove-to-sol: "Control+u";*/
+/*	kb-accept-entry: "Control+j,Control+m,Return,KP_Enter";*/
+/*	kb-accept-custom: "Control+Return";*/
+/*	kb-accept-custom-alt: "Control+Shift+Return";*/
+/*	kb-accept-alt: "Shift+Return";*/
+/*	kb-delete-entry: "Shift+Delete";*/
+/*	kb-mode-next: "Shift+Right,Control+Tab";*/
+/*	kb-mode-previous: "Shift+Left,Control+ISO_Left_Tab";*/
+/*	kb-mode-complete: "Control+l";*/
+/*	kb-row-left: "Control+Page_Up";*/
+/*	kb-row-right: "Control+Page_Down";*/
+/*	kb-row-up: "Up,Control+p";*/
+/*	kb-row-down: "Down,Control+n";*/
+/*	kb-row-tab: "";*/
+/*	kb-element-next: "Tab";*/
+/*	kb-element-prev: "ISO_Left_Tab";*/
+/*	kb-page-prev: "Page_Up";*/
+/*	kb-page-next: "Page_Down";*/
+/*	kb-row-first: "Home,KP_Home";*/
+/*	kb-row-last: "End,KP_End";*/
+/*	kb-row-select: "Control+space";*/
+/*	kb-screenshot: "Alt+S";*/
+/*	kb-ellipsize: "Alt+period";*/
+/*	kb-toggle-case-sensitivity: "grave,dead_grave";*/
+/*	kb-toggle-sort: "Alt+grave";*/
+/*	kb-cancel: "Escape,Control+g,Control+bracketleft";*/
+/*	kb-custom-1: "Alt+1";*/
+/*	kb-custom-2: "Alt+2";*/
+/*	kb-custom-3: "Alt+3";*/
+/*	kb-custom-4: "Alt+4";*/
+/*	kb-custom-5: "Alt+5";*/
+/*	kb-custom-6: "Alt+6";*/
+/*	kb-custom-7: "Alt+7";*/
+/*	kb-custom-8: "Alt+8";*/
+/*	kb-custom-9: "Alt+9";*/
+/*	kb-custom-10: "Alt+0";*/
+/*	kb-custom-11: "Alt+exclam";*/
+/*	kb-custom-12: "Alt+at";*/
+/*	kb-custom-13: "Alt+numbersign";*/
+/*	kb-custom-14: "Alt+dollar";*/
+/*	kb-custom-15: "Alt+percent";*/
+/*	kb-custom-16: "Alt+dead_circumflex";*/
+/*	kb-custom-17: "Alt+ampersand";*/
+/*	kb-custom-18: "Alt+asterisk";*/
+/*	kb-custom-19: "Alt+parenleft";*/
+/*	kb-select-1: "Super+1";*/
+/*	kb-select-2: "Super+2";*/
+/*	kb-select-3: "Super+3";*/
+/*	kb-select-4: "Super+4";*/
+/*	kb-select-5: "Super+5";*/
+/*	kb-select-6: "Super+6";*/
+/*	kb-select-7: "Super+7";*/
+/*	kb-select-8: "Super+8";*/
+/*	kb-select-9: "Super+9";*/
+/*	kb-select-10: "Super+0";*/
+/*	ml-row-left: "ScrollLeft";*/
+/*	ml-row-right: "ScrollRight";*/
+/*	ml-row-up: "ScrollUp";*/
+/*	ml-row-down: "ScrollDown";*/
+/*	me-select-entry: "MousePrimary";*/
+/*	me-accept-entry: "MouseDPrimary";*/
+/*	me-accept-custom: "Control+MouseDPrimary";*/
+  timeout {
+      action: "kb-cancel";
+      delay:  0;
+  }
+  filebrowser {
+      directories-first: true;
+      sorting-method:    "name";
+  }
+}
+//@theme "themes/squared.rasi"
+//@theme "themes/cherry.rasi"
+@theme "themes/paper-float.rasi"

archive/.config/rofi/themes/cherry.rasi

@@ -0,0 +1,79 @@
+configuration {
+	modi:				"drun";
+	font:				"Rubik 10";
+	display-drun: 			"";
+	sidebar-mode: 			false;
+}
+
+@theme "/dev/null"
+
+* {
+	bg:				#b5b5aa;
+	fg:				#2b2b2b;
+	button:				#9e9e95;
+
+	background-color:		@bg;
+	text-color:			@fg;
+}
+
+window {
+	transparency:                   "real";
+	border-radius:                  7px;
+	width:			    	40%;
+	y-offset:                       10px;
+	padding: 			20px;
+	location: 			south;
+}
+
+prompt { enabled: false; }
+
+entry {
+	placeholder:			"Search";
+	expand:                         true;
+	padding:                        5px 2% 5px 2%;
+	background-color:               @button;
+        placeholder-color:              @fg;
+}
+
+inputbar {
+	children: 			[ prompt, entry ];
+	background-color:               @button;
+	text-color:                     @fg;
+	expand:                         false;
+	border-radius:                  6px;
+	padding:                        8px;
+}
+
+listview {
+	columns:                        1;
+	lines:	                        8;
+	cycle:                          false;
+	dynamic:                        true;
+	layout:                         vertical;
+}
+
+mainbox {
+	children:                       [ inputbar, listview ];
+	spacing:                       	2%;
+	padding:                        2% 1% 2% 1%;
+}
+
+element {
+	orientation:                    vertical;
+	border-radius:                  0%;
+	padding:                        1.5% 0% 1.5% 0%;
+}
+
+element-text {
+	expand:                         true;
+	vertical-align:                 0.5;
+	margin:                         0.5% 3% 0% 3%;
+	background-color:               inherit;
+        text-color:                     inherit;
+}
+
+element selected {
+	background-color:               @fg;
+	text-color:                     @bg;
+	border-radius:                  6px;
+}

archive/.config/rofi/themes/paper-float.rasi

@@ -0,0 +1,148 @@
+/**
+ * A floating box version of the paper theme.
+ *
+ * User: Qball
+ * Copyright: Dave Davenport
+ */
+
+* {
+    grey:  #484848;
+    black: #282828;
+    red: #ee5396;
+    green: #25be6a;
+    yellow: #f8e17c;
+    blue: #33b1ff;
+    magenta: #be95ff;
+    cyan: #3ddbd9;
+    white: #dfdfe0;
+    
+    spacing: 2;
+    background-color: #00000000;
+    border-color: #3ddbd9;
+    anchor: north;
+    location: center;
+}
+window {
+    transparency: "screenshot";
+    background-color: #00000000;
+    border: 0;
+    padding: 0% 0% 1em 0%;
+    x-offset: 0;
+    y-offset: -10%;
+}
+mainbox {
+    padding: 0px;
+    border: 0;
+    spacing: 1%;
+}
+prompt {
+    text-color: @white;
+    text-style: bold;
+}
+entry {
+    text-color: @white;
+}
+message {
+    border: 2px;
+    padding: 1em;
+    background-color: @black;
+    text-color: @white;
+}
+textbox normal {
+    text-color: @white;
+    padding: 0;
+    border: 0;
+}
+listview {
+    fixed-height: 1;
+    border: 2px;
+    padding: 1em;
+    reverse: false;
+
+    columns: 1;
+    background-color: @black;
+}
+element {
+    border: 0;
+    padding: 2px;
+    highlight: bold ;
+}
+element-text {
+    background-color: inherit;
+    text-color:       inherit;
+}
+element normal.normal {
+    text-color: @white;
+    background-color: @black;
+}
+element normal.urgent {
+    text-color: @red;
+    background-color: @black;
+}
+element normal.active {
+    text-color: @black;
+    background-color: @cyan;
+}
+element selected.normal {
+    text-color: @black;
+    background-color: @cyan;
+}
+element selected.urgent {
+    text-color: #F5F5F5;
+    background-color: @red;
+}
+element selected.active {
+    text-color: @black;
+    background-color: @cyan;
+}
+element alternate.normal {
+    text-color: @white;
+    background-color: @grey;
+}
+element alternate.urgent {
+    text-color: @red;
+    background-color: @grey;
+}
+element alternate.active {
+    text-color: @white;
+    background-color: @grey;
+}
+scrollbar {
+    border: 0;
+    padding: 0;
+}
+inputbar {
+    spacing: 0;
+    border: 2px;
+    padding: 0.5em 1em;
+    background-color: @black;
+    index: 0;
+}
+inputbar normal {
+    foreground-color: @white;
+    background-color: @white;
+}
+mode-switcher {
+    border: 2px;
+    padding: 0.5em 1em;
+    background-color: @black;
+    index: 10;
+}
+button selected {
+    text-color: @cyan;
+}
+inputbar {
+    children:   [ prompt,textbox-prompt-colon,entry,case-indicator ];
+}
+textbox-prompt-colon {
+    expand:     false;
+    str:        ":";
+    margin:     0px 0.3em 0em 0em ;
+    text-color: var(white);
+}
+error-message {
+    border: 2px;
+    padding: 1em;
+    background-color: @black;
+    text-color: @red;
+}

archive/.config/rofi/themes/squared.rasi

@@ -0,0 +1,98 @@
+/*******************************************************************************
+ * ROFI SQUARED THEME USING THE MATERIAL DARKER PALETTE 
+ * User                 : LR-Tech               
+ * Theme Repo           : https://github.com/lr-tech/rofi-themes-collection
+ *******************************************************************************/
+
+* {
+
+    bg0:     #212121;
+    bg1:     #404040;
+    fg0:     #eeffff;
+
+    accent-color:     #f07178;
+    urgent-color:     #ffcb6b;
+
+    background-color:   transparent;
+    text-color:         @fg0;
+
+    margin:     0;
+    padding:    0;
+    spacing:    0;
+}
+
+window {
+    location:   center;
+    width:      480;
+
+    background-color:   @bg0;
+}
+
+inputbar {
+    spacing:    8px; 
+    padding:    8px;
+
+    background-color:   @bg1;
+}
+
+prompt, entry, element-icon, element-text {
+    vertical-align: 0.5;
+}
+
+prompt {
+    text-color: @accent-color;
+}
+
+textbox {
+    padding:            8px;
+    background-color:   @bg1;
+}
+
+listview {
+    padding:    4px 0;
+    lines:      8;
+    columns:    1;
+
+    fixed-height:   false;
+}
+
+element {
+    padding:    8px;
+    spacing:    8px;
+}
+
+element normal normal {
+    text-color: @fg0;
+}
+
+element normal urgent {
+    text-color: @urgent-color;
+}
+
+element normal active {
+    text-color: @accent-color;
+}
+
+element alternate active {
+    text-color: @accent-color;
+}
+
+element selected {
+    text-color: @bg0;
+}
+
+element selected normal, element selected active {
+    background-color:   @accent-color;
+}
+
+element selected urgent {
+    background-color:   @urgent-color;
+}
+
+element-icon {
+    size:   0.8em;
+}
+
+element-text {
+    text-color: inherit;
+}

archive/.config/starship.toml

@@ -0,0 +1,120 @@
+"$schema" = 'https://starship.rs/config-schema.json'
+
+add_newline = false
+format = """$status$cmd_duration
+
+<$username$hostname$custom> | $directory$git_branch $git_status$git_state
+$time $character"""
+
+
+[character]
+success_symbol = '>'
+error_symbol = '>'
+
+[git_commit]
+tag_symbol = " tag "
+
+[git_status]
+ahead = ">"
+behind = "<"
+diverged = "<>"
+renamed = "r"
+deleted = "x"
+
+[cmd_duration]
+format = "ran for [$duration]($style)"
+style = "italic yellow"
+
+[custom.toolbox]
+when = """ test -f /run/.containerenv && test -f /run/.toolboxenv """
+description = "Config for toolbox"
+style = "red"
+command = """ cat /run/.containerenv | sed -n '2 p' | awk -F '"' 'NF>2{print $2}' """
+format = ':[$output]($style)'
+
+[directory]
+read_only = " ro"
+
+[fill]
+symbol = ' '
+
+[git_branch]
+format = "on [$branch(:$remote_branch)]($style)"
+
+[hg_branch]
+symbol = "hg "
+
+[hostname]
+ssh_only = false
+ssh_symbol = "ssh:"
+format = "@[$ssh_symbol$hostname]($style)"
+
+[memory_usage]
+symbol = "memory "
+
+[os.symbols]
+Alpine = "alp "
+Amazon = "amz "
+Android = "andr "
+Arch = "rch "
+CentOS = "cent "
+Debian = "deb "
+DragonFly = "dfbsd "
+Emscripten = "emsc "
+EndeavourOS = "ndev "
+Fedora = "fed "
+FreeBSD = "fbsd "
+Garuda = "garu "
+Gentoo = "gent "
+HardenedBSD = "hbsd "
+Illumos = "lum "
+Linux = "lnx "
+Macos = "mac "
+Manjaro = "mjo "
+Mariner = "mrn "
+MidnightBSD = "mid "
+Mint = "mint "
+NetBSD = "nbsd "
+NixOS = "nix "
+OpenBSD = "obsd "
+openSUSE = "osuse "
+OracleLinux = "orac "
+Pop = "pop "
+Raspbian = "rasp "
+Redhat = "rhl "
+RedHatEnterprise = "rhel "
+Redox = "redox "
+Solus = "sol "
+SUSE = "suse "
+Ubuntu = "ubnt "
+Unknown = "unk "
+Windows = "win "
+
+[sudo]
+symbol = "#"
+disabled = true
+format = "[$symbol]($style)"
+style = ''
+
+[status]
+symbol = '[✗](bold red)'
+success_symbol = ''
+format = '[\[$symbol$maybe_int\]]($style) '
+not_executable_symbol = "[!EXE](red)"
+style = 'purple'
+not_found_symbol = "[!FOUND](red)"
+sigint_symbol = "[SIGINT](red)"
+signal_symbol = "[SIG](red)"
+map_symbol = true
+pipestatus = true
+pipestatus_format = '$pipestatus=> [\[$common_meaning$signal_name$maybe_int\]]($style) '
+disabled = false
+
+[time]
+disabled = false
+format = '\[[$time]($style)\]'
+
+[username]
+show_always = true
+format = "[$user]($style)"
+

archive/.config/sway/config

@@ -0,0 +1,286 @@
+# Default config for sway
+#
+# Copy this to ~/.config/sway/config and edit it to your liking.
+#
+# Read `man 5 sway` for a complete reference.
+
+### Variables
+#
+# Logo key. Use Mod1 for Alt.
+set $mod Mod4
+# Home row direction keys, like vim
+set $left h
+set $down j
+set $up k
+set $right l
+# Your preferred terminal emulator
+# Recommends: foot
+set $term kitty
+# set alternate terminal emulator
+set $alt_term alacritty
+# Your preferred application launcher
+# Note: pass the final command to swaymsg so that the resulting window can be opened
+# on the original workspace that the command was run on.
+# Recommends: rofi-wayland
+set $rofi_cmd rofi \
+        -terminal '$term'
+# Shows a combined list of the applications with desktop files and
+# executables from PATH.
+# TODO: add window with the next release of rofi-wayland
+set $menu $rofi_cmd -show combi -combi-modes drun#run -modes combi
+
+### Clipboard configuration
+
+exec wl-paste --type text --watch cliphist store
+exec wl-paste --type image --watch cliphist store
+set $clip cliphist list | rofi -dmenu -P "Clipboard" | cliphist decode | wl-copy
+
+### Output configuration
+#
+# Default wallpaper (more resolutions are available in /usr/share/backgrounds/sway/)
+# Requires: desktop-backgrounds-compat, swaybg
+output * bg /usr/share/backgrounds/zenitsu.jpg fill
+
+for_window [window_type="dialog"] floating enable
+for_window [window_role="dialog"] floating enable
+for_window [app_id="org.mozilla.firefox" title="Picture-in-Picture"] floating enable sticky enable
+for_window [app_id="com.github.hluk.copyq"] floating enable
+#
+# Example configuration:
+#
+#   output HDMI-A-1 resolution 1920x1080 position 1920,0
+# You can get the names of your outputs by running: swaymsg -t get_outputs
+# hidpi setup
+# output eDP-1 scale 1.25
+# output 'LG Electronics LG ULTRAWIDE 205NTSUG4894' scale 2
+
+## Decorations
+client.focused #00ffff #262626 #ffffff #48d1cc #00ffff
+client.urgent #dc143c #262626 #ffffff #f08080 #dc143c
+
+
+## Font
+default_border pixel 2
+default_floating_border pixel 2
+smart_borders on
+# hide_edge_borders both
+# smart_gaps on 
+font pango:'Monaspace Radon' Regular 11
+# titlebar_padding 1
+# titlebar_border_thickness 0
+# gaps outer 4
+# gaps inner 2
+
+
+### Idle configuration
+#
+# Example configuration:
+
+# set $lock swaylock -f -c 000000 
+# exec swayidle -w \
+#         timeout 300 $lock \
+#         timeout 600 'swaymsg "output * power off"' resume 'swaymsg "output * power on"' \
+#         before-sleep $lock
+
+# This will lock your screen after 300 seconds of inactivity, then turn off
+# your displays after another 300 seconds, and turn your screens back on when
+# resumed. It will also lock your screen before your computer goes to sleep.
+
+### Input configuration
+#
+# Example configuration:
+#
+#   input "2:14:SynPS/2_Synaptics_TouchPad" {
+#       dwt enabled
+#       tap enabled
+#       natural_scroll enabled
+#       middle_emulation enabled
+#   }
+#
+# You can get the names of your inputs by running: swaymsg -t get_inputs
+# Read `man 5 sway-input` for more information about this section.
+input type:touchpad {
+    tap enabled
+    natural_scroll enabled
+}
+
+input type:keyboard {
+    xkb_options caps:ctrl_modifier
+}
+
+### Key bindings
+#
+# Basics:
+#
+    # Start a terminal
+    bindsym $mod+Return exec $term
+    bindsym $mod+Shift+Return exec $alt_term
+
+    # Kill focused window
+    bindsym $mod+Shift+q kill
+
+    # Start your launcher
+    bindsym $mod+d exec $menu
+
+    # Drag floating windows by holding down $mod and left mouse button.
+    # Resize them with right mouse button + $mod.
+    # Despite the name, also works for non-floating windows.
+    # Change normal to inverse to use left mouse button for resizing and right
+    # mouse button for dragging.
+    floating_modifier $mod normal
+
+    # Reload the configuration file
+    bindsym $mod+Shift+c reload
+
+    # Exit sway (logs you out of your Wayland session)
+    bindsym $mod+Shift+e exec swaynag -t warning -m 'You pressed the exit shortcut. Do you really want to exit sway? This will end your Wayland session.' -B 'Yes, exit sway' 'swaymsg exit'
+#
+# Moving around:
+#
+    # Move your focus around
+    bindsym $mod+$left focus left
+    bindsym $mod+$down focus down
+    bindsym $mod+$up focus up
+    bindsym $mod+$right focus right
+    # Or use $mod+[up|down|left|right]
+    bindsym $mod+Left focus left
+    bindsym $mod+Down focus down
+    bindsym $mod+Up focus up
+    bindsym $mod+Right focus right
+
+    # Move the focused window with the same, but add Shift
+    bindsym $mod+Shift+$left move left
+    bindsym $mod+Shift+$down move down
+    bindsym $mod+Shift+$up move up
+    bindsym $mod+Shift+$right move right
+    # Ditto, with arrow keys
+    bindsym $mod+Shift+Left move left
+    bindsym $mod+Shift+Down move down
+    bindsym $mod+Shift+Up move up
+    bindsym $mod+Shift+Right move right
+#
+# Workspaces:
+#
+    # Switch to workspace
+    bindsym $mod+1 workspace number 1
+    bindsym $mod+2 workspace number 2
+    bindsym $mod+3 workspace number 3
+    bindsym $mod+4 workspace number 4
+    bindsym $mod+5 workspace number 5
+    bindsym $mod+6 workspace number 6
+    bindsym $mod+7 workspace number 7
+    bindsym $mod+8 workspace number 8
+    bindsym $mod+9 workspace number 9
+    bindsym $mod+0 workspace number 10
+    # Move focused container to workspace
+    bindsym $mod+Shift+1 move container to workspace number 1
+    bindsym $mod+Shift+2 move container to workspace number 2
+    bindsym $mod+Shift+3 move container to workspace number 3
+    bindsym $mod+Shift+4 move container to workspace number 4
+    bindsym $mod+Shift+5 move container to workspace number 5
+    bindsym $mod+Shift+6 move container to workspace number 6
+    bindsym $mod+Shift+7 move container to workspace number 7
+    bindsym $mod+Shift+8 move container to workspace number 8
+    bindsym $mod+Shift+9 move container to workspace number 9
+    bindsym $mod+Shift+0 move container to workspace number 10
+    # Note: workspaces can have any name you want, not just numbers.
+    # We just use 1-10 as the default.
+    # Touchpad swipes
+    bindgesture swipe:right workspace prev
+    bindgesture swipe:left workspace next
+    # Move back and forth
+    bindsym $mod+Tab workspace back_and_forth
+#
+# Layout stuff:
+#
+    # You can "split" the current object of your focus with
+    # $mod+b or $mod+v, for horizontal and vertical splits
+    # respectively.
+    bindsym $mod+b splith
+    bindsym $mod+v splitv
+
+    # Switch the current container between different layout styles
+    bindsym $mod+s layout stacking
+    bindsym $mod+w layout tabbed
+    bindsym $mod+e layout toggle split
+    bindsym $mod+Shift+s sticky toggle
+
+   # Make the current focus fullscreen
+    bindsym $mod+f fullscreen
+
+    # Toggle the current focus between tiling and floating mode
+    bindsym $mod+Shift+space floating toggle
+
+    # Swap focus between the tiling area and the floating area
+    bindsym $mod+space focus mode_toggle
+
+    # Move focus to the parent container
+    bindsym $mod+a focus parent
+#
+# Scratchpad:
+#
+    # Sway has a "scratchpad", which is a bag of holding for windows.
+    # You can send windows there and get them back later.
+
+    # Move the currently focused window to the scratchpad
+    bindsym $mod+Shift+minus move scratchpad
+
+    # Show the next scratchpad window or hide the focused scratchpad window.
+    # If there are multiple scratchpad windows, this command cycles through them.
+    bindsym $mod+minus scratchpad show
+#
+# Clipboard:
+#
+    bindsym $mod+c exec $clip
+
+
+#
+# Resizing containers:
+#
+mode "resize" {
+    # left will shrink the containers width
+    # right will grow the containers width
+    # up will shrink the containers height
+    # down will grow the containers height
+    bindsym $left resize shrink width 10px
+    bindsym $down resize grow height 10px
+    bindsym $up resize shrink height 10px
+    bindsym $right resize grow width 10px
+
+    # Ditto, with arrow keys
+    bindsym Left resize shrink width 10px
+    bindsym Down resize grow height 10px
+    bindsym Up resize shrink height 10px
+    bindsym Right resize grow width 10px
+
+    # Return to default mode
+    bindsym Return mode "default"
+    bindsym Escape mode "default"
+}
+bindsym $mod+r mode "resize"
+
+## gestures
+
+
+# Include configs from 3 locations:
+#  - /usr/share/sway/config.d
+#  - /etc/sway/config.d
+#  - $XDG_CONFIG_HOME/sway/config.d ($HOME/.config/sway/config.d)
+#
+# If multiple directories contain the files with the same name, the later
+# directory takes precedence; `$XDG_CONFIG_HOME/sway/config.d/20-swayidle.conf`
+# will always be loaded instead of `/usr/share/sway/config.d/20-swayidle.conf`
+# or `/etc/sway/config.d/20-swayidle.conf`
+#
+# This mechanism permits overriding our default configuration per-system
+# (/etc) or per-user ($XDG_CONFIG_HOME) basis. Just create the file you
+# want to modify/override in the higher-level directory.
+#
+# For example, to disable the default bar from Fedora configs, you'll need to
+#     $ echo -n > "$HOME/.config/sway/config.d/90-bar.conf"
+#
+# Note the quoting, the $() and the arguments quoting. All the parts are equally
+# important to make the magic work. And if you want to learn the secret behind
+# the trick, it's all in the `wordexp(3)`.
+#
+include '$(/usr/libexec/sway/layered-include "/usr/share/sway/config.d/*.conf" "/etc/sway/config.d/*.conf" "${XDG_CONFIG_HOME:-$HOME/.config}/sway/config.d/*.conf")'

archive/.config/sway/config.d/60-bindings-screenshot.conf

@@ -0,0 +1,20 @@
+# Key bindings for taking screenshots
+#
+# The image files will be written to XDG_SCREENSHOTS_DIR if this is set
+# or defined in user-dirs.dir, or to a fallback location XDG_PICTURES_DIR.
+#
+# Copy the file to ~/.config/sway/config.d/60-bindings-screenshot.conf (or to
+# your $XDG_CONFIG_HOME location if set differently) to be able to overwrite
+# existing shortcuts.
+# Check 'man grimshot' for additional commands that you may find useful.
+#
+# Requires:     grimshot
+
+bindsym {
+    # Capture the currently active output
+    Print       exec grimshot save output
+    # Capture the currently active window
+    Alt+Print   exec grimshot save active
+    # Select and capture a custom rectangular area
+    Ctrl+Print  exec grimshot save area
+}

archive/.config/sway/volume-notification

@@ -0,0 +1,21 @@
+#!/bin/bash
+
+volume_sink=$(pactl get-sink-volume @DEFAULT_SINK@ | awk '{print $5}' | tr -d '%')
+    volume_source=$(pactl get-source-volume @DEFAULT_SOURCE@ | awk '{print $5}' | tr -d '%')
+
+    is_sink_muted=$(pactl list sinks | grep "Mute: yes" | awk '{print $2}')
+    is_source_muted=$(pactl list sources | grep "Mute: yes" | awk '{print $2}')
+
+    if [[ "$is_sink_muted" == "yes" ]]; then
+        sink_mute_status="Muted"
+    else
+        sink_mute_status="Unmuted"
+    fi
+
+    if [[ "$is_source_muted" == "yes" ]]; then
+        source_mute_status="Mic Muted"
+    else
+        source_mute_status="Mic Unmuted"
+    fi
+
+    dunstify -u low -i audio-volume-medium -r 2593 "Volume: $volume_sink%" "\nSpeaker: $sink_mute_status\nMic: $source_mute_status" -h int:value:$volume_sink

archive/.config/waybar/config.jsonc

@@ -0,0 +1,231 @@
+{
+    "layer": "top", // Waybar at top layer
+    "position": "left", // Waybar position (top|bottom|left|right)
+    // "height": 40, // Waybar height (to be removed for auto height)
+    "width": 20, // Waybar width
+    "spacing": 4, // Gaps between modules (4px)
+    "mode": "dock",
+    "fixed-center": false,
+    // Choose the order of the modules
+    "modules-left": [
+        "sway/workspaces",
+        "sway/mode",
+        "sway/scratchpad"
+    ],
+    "modules-center": [
+        "sway/window"
+    ],
+    "modules-right": [
+        "battery",
+        "custom/spacer",
+        "custom/wakatime",
+        "custom/spacer",
+        "pulseaudio",
+        "custom/spacer",
+        "group/system",
+        "custom/spacer",
+        "network",
+        "custom/spacer",
+        "group/tray",
+        "custom/spacer",
+        "clock",
+        "custom/spacer",
+        "custom/dunst"
+    ],
+    "group/system": {
+        "orientation": "inherit",
+        "modules": [
+            "temperature",
+            "cpu",
+            "custom/spacer",
+            "memory",
+            "custom/spacer"
+        ],
+        "drawer": {
+            "transition-left-to-right": false
+        }
+    },
+    "group/tray": {
+        "orientation": "inherit",
+        "modules": [
+            "idle_inhibitor",
+            "tray"
+        ],
+        "drawer": {
+            "transition-left-to-right": false
+            // "tranasition-duration": 100
+        }
+    },
+    // Modules configuration
+    "sway/workspaces": {
+        //   "disable-scroll": true,
+        //   "all-outputs": true,
+        "warp-on-scroll": false,
+        "format": "{name}",
+        "disable-scroll-wraparound": true
+    },
+    "sway/window": {
+        "icon": false,
+        // "icon-size": 20,
+        "rotate": 270,
+        // "format": ""
+        "rewrite": {
+            ".* - ([A-Za-z0-9 ]+)": "$1",
+            ".* — ([A-Za-z0-9 ]+)": "$1",
+            "^avinal@spacetime:.*": "GNOME Terminal"
+        }
+    },
+    "sway/mode": {
+        "format": "<span style=\"italic\">{}</span>",
+        "rotate": 270
+    },
+    "sway/scratchpad": {
+        "format": "{icon} {count}",
+        "show-empty": false,
+        "format-icons": [
+            "",
+            ""
+        ],
+        "tooltip": true,
+        "tooltip-format": "{app}: {title}",
+        "rotate": 270
+    },
+    "idle_inhibitor": {
+        "format": "{icon}",
+        "format-icons": {
+            "activated": "Keep On",
+            "deactivated": "OFF"
+        },
+        "rotate": 270,
+        "tooltip": false
+        // "tooltip-format-activated": "The screen won't turn off on idle.",
+        // "tooltip-format-deactivated": "The screen will turn off on idle."
+    },
+    "tray": {
+        "icon-size": 20,
+        "spacing": 10
+    },
+    "clock": {
+        "rotate": 270,
+        "tooltip-format": "<big>{:%Y %B}</big>\n<tt><small>{calendar}</small></tt>",
+        "format": "<span color='#ff6699'>{:%a %b %d %R}</span>",
+        "calendar": {
+            "mode": "month",
+            "mode-mon-col": 3,
+            "weeks-pos": "right",
+            "on-scroll": 1,
+            "format": {
+                "months": "<span color='#ffead3'><b>{}</b></span>",
+                "days": "<span color='#ecc6d9'><b>{}</b></span>",
+                "weeks": "<span color='#99ffdd'><b>W{}</b></span>",
+                "weekdays": "<span color='#ffcc66'><b>{}</b></span>",
+                "today": "<span color='#ff6699'><b><u>{}</u></b></span>"
+            }
+        },
+        "actions": {
+            "on-click-right": "mode",
+            "on-click-forward": "tz_up",
+            "on-click-backward": "tz_down",
+            "on-scroll-up": "shift_up",
+            "on-scroll-down": "shift_down"
+        }
+    },
+    "cpu": {
+        "format": "CPU {usage}%",
+        "tooltip": true,
+        "interval": 5,
+        "rotate": 270
+    },
+    "memory": {
+        "format": "RAM {}%",
+        "tooltip-format": "RAM: {used}/{avail} | Swap: {swapUsed}/{swapTotal}",
+        "rotate": 270
+    },
+    "temperature": {
+        "critical-threshold": 80,
+        "format": "{icon} {temperatureC}°C",
+        "format-icons": [
+            "Chill",
+            "Warm",
+            "Hot",
+            "Burn"
+        ],
+        "rotate": 270
+    },
+    "battery": {
+        "states": {
+            "best": 99,
+            "good": 70,
+            "warning": 40,
+            "critical": 20
+        },
+        "format": "{capacity}%",
+        "format-charging": "Charging {capacity}%",
+        "format-plugged": "Plugged {capacity}%",
+        "format-alt": "{icon} {time}",
+        "rotate": 270,
+        // "format-good": "", // An empty format will hide the module
+        // "format-full": "",
+        "format-icons": {
+            "best": "Feeling good",
+            "good": "Will last",
+            "warning": "Charge soon",
+            "critical": "Gonna die in"
+        }
+    },
+    "network": {
+        "interval": 10,
+        "format-wifi": "{essid} ({signalStrength}%)",
+        "format-ethernet": "Wired {ifname}",
+        "format-linked": "<span color='red'>No Internet!</span>",
+        "tooltip-format-disconnected": "Please connect to a network.",
+        "tooltip-format": "Up: {bandwidthUpBits:4} Down: {bandwidthDownBits:4}",
+        "format-disconnected": "Disconnected!",
+        "rotate": 270
+    },
+    "pulseaudio": {
+        "format": "{icon} {volume}% {format_source}",
+        "format-bluetooth": "Bluetooth {volume}% {format_source}",
+        "format-bluetooth-muted": "<span color='red'><s>Bluetooth</> {format_source}",
+        "format-muted": "<span color='red'><s>{icon}</s></span> {format_source}",
+        "format-source": "Mic {volume}%",
+        "format-source-muted": "<span color='red'><s>Mic</s></span>",
+        "format-icons": {
+            "headphone": "Headphone",
+            "headset": "Headphone",
+            "phone": "Phone",
+            "hdmi": "Monitor",
+            "default": "Speaker"
+        },
+        "on-click": "pavucontrol",
+        "rotate": 270
+    },
+    "custom/wakatime": {
+        "format": "{}",
+        "exec": "~/.config/waybar/scripts/wakatime.sh",
+        "tooltip": true,
+        "return-type": "json",
+        "interval": 900,
+        "rotate": 270
+    },
+    "custom/weather": {
+        "exec": "$HOME/.config/waybar/scripts/get-weather.sh Bengaluru",
+        "return-type": "json",
+        "format": "{}",
+        "tooltip": true,
+        "interval": 3600
+    },
+    "custom/dunst": {
+        "exec": "~/.config/waybar/scripts/dunst.sh",
+        "on-click": "dunstctl set-paused toggle",
+        "format": "{}",
+        "return-type": "json",
+        "restart-interval": 1,
+        "rotate": 270
+    },
+    "custom/spacer": {
+        "format": "|",
+        "rotate": 270,
+        "tooltip": false
+    }
+}

archive/.config/waybar/scripts/dunst.sh

@@ -0,0 +1,17 @@
+#!/bin/bash
+
+COUNT=$(dunstctl count waiting)
+status=""
+class=""
+tooltip="Notifications are "
+if dunstctl is-paused | grep -q "false" ; then
+    status="NOT"
+    tooltip+="active"
+else
+    status="DND"
+    class="dnd"
+    tooltip+="paused"
+fi
+
+if [ "$COUNT" != 0 ]; then status+=":$COUNT"; fi
+printf '{"text":"%s","tooltip":"%s","class":"%s"}' "$status" "$tooltip" "$class" | jq --unbuffered --compact-output

archive/.config/waybar/scripts/get-weather.sh

@@ -0,0 +1,19 @@
+#!/usr/bin/env bash
+# get_weather.sh
+for i in {1..5}
+do
+    text=$(curl -s "https://wttr.in/$1?format=1")
+    if [[ $? == 0 ]]
+    then
+        text=$(echo "$text" | sed -E "s/\s+/ /g")
+        tooltip=$(curl -s "https://wttr.in/$1?format=4")
+        if [[ $? == 0 ]]
+        then
+            tooltip=$(echo "$tooltip" | sed -E "s/\s+/ /g")
+            echo "{\"text\":\"$text\", \"tooltip\":\"$tooltip\"}"
+            exit
+        fi
+    fi
+    sleep 2
+done
+echo "{\"text\":\"error\", \"tooltip\":\"error\"}"

archive/.config/waybar/scripts/wakatime.sh

@@ -0,0 +1,19 @@
+#!/bin/bash
+
+output=$(wakatime --today)
+
+# Extract hours and minutes using awk and sum the total
+total_minutes=$(echo "$output" | awk -F' ' '
+{
+    for (i=1; i<=NF; i++) {
+        if ($i == "hrs" || $i == "hr") total += $(i-1) * 60;
+        if ($i == "mins" || $i == "min") total += $(i-1);
+    }
+} END {print total}')
+
+# Calculate total hours and remaining minutes
+total_hours=$((total_minutes / 60))
+remaining_minutes=$((total_minutes % 60))
+
+# Print the results
+printf '{"text":"%02dh %02dm","tooltip":"%s","class":"wakatime"}' $total_hours $remaining_minutes "$output" | jq --unbuffered --compact-output

archive/.config/waybar/style.css

@@ -0,0 +1,226 @@
+* {
+    /* `otf-font-awesome` is required to be installed for icons */
+    font-family: 'Monaspace Radon';
+    font-size: 15px;
+    padding: 2px 0;
+    margin: 2px 0;
+    border: none;
+    border-radius: 0;
+}
+
+#window {
+    padding: 1px 0;
+}
+
+window#waybar {
+    background: #262626;
+    /* background-color: rgba(43, 48, 59, 0.5); */
+    /* border-top: 3px solid rgba(100, 114, 125, 0.5); */
+    color: #ffffff;
+    transition-property: background-color;
+    transition-duration: .5s;
+    /* border-right: 1px solid cyan; */
+    padding: 0 0;
+}
+
+
+button {
+    /* Use box-shadow instead of border so the text isn't offset */
+    box-shadow: inset 0 -3px transparent;
+    /* Avoid rounded borders under each button name */
+    border: none;
+    border-radius: 0;
+}
+
+/* https://github.com/Alexays/Waybar/wiki/FAQ#the-workspace-buttons-have-a-strange-hover-effect */
+button:hover {
+    background: inherit;
+    /* box-shadow: inset 0 -3px #ffffff; */
+}
+
+#workspaces button {
+    padding: 2px 3px;
+    background-color: transparent;
+    color: #ffffff;
+    /* margin-left: -6px; */
+}
+
+#workspaces button:hover {
+    background: #66cc99;
+}
+
+#workspaces button.urgent {
+    background-color: #eb4d4b;
+}
+
+
+#workspaces button.focused {
+    border-top: 2px solid cyan;
+    border-bottom: 2px solid cyan;
+    color: palevioletred;
+}
+
+#mode {
+    /* background-color: #64727D; */
+    animation-name: blink;
+    /* animation-duration: 0.5s; */
+    animation-timing-function: linear;
+    animation-iteration-count: infinite;
+    animation-direction: alternate;
+    border-left: 2px solid darksalmon;
+}
+
+#clock,
+#battery,
+#cpu,
+#memory,
+#temperature,
+#network,
+#pulseaudio,
+#wireplumber,
+#custom-dunst,
+#custom-spacer,
+#tray,
+#mode,
+#idle_inhibitor,
+#scratchpad {
+    padding: 0 2px;
+    /* border-right: 1px solid cyan; */
+    background-color: #262626;
+    /* margin: 0 3px; */
+}
+
+#window,
+#workspaces {
+    /* padding: 1px 0; */
+    margin: 0 10px;
+}
+
+/* If workspaces is the leftmost module, omit left margin */
+.modules-left>widget:first-child>#workspaces {
+    margin-top: 0;
+}
+
+/* If workspaces is the rightmost module, omit right margin */
+.modules-right>widget:last-child>#workspaces {
+    margin-bottom: 0;
+}
+
+#clock {
+    /* background-color: #64727D; */
+}
+
+#battery {
+    /* background-color: #ffffff; */
+    color: #ffffff;
+}
+
+#battery.charging,
+#battery.plugged {
+    color: #26A65B;
+    /* background-color: #26A65B; */
+}
+
+@keyframes blink {
+    to {
+        color: #ffffff;
+    }
+}
+
+#battery.critical:not(.charging) {
+    /* background-color: #f53c3c; */
+    color: #f53c3c;
+    animation-name: blink;
+    animation-duration: 0.5s;
+    animation-timing-function: linear;
+    animation-iteration-count: infinite;
+    animation-direction: alternate;
+}
+
+label:focus {
+    background-color: #000000;
+}
+
+#cpu {
+    /* background-color: #2ecc71; */
+    color: #2ecc71;
+}
+
+#memory {
+    /* background-color: #9b59b6; */
+    color: #9b59b6;
+}
+
+#disk {
+    color: #964B00;
+}
+
+#backlight {
+    color: #90b1b1;
+}
+
+#network {
+    color: lightseagreen;
+}
+
+#network.disconnected {
+    color: #f53c3c;
+}
+
+#pulseaudio {
+    color: #f1c40f;
+}
+
+#pulseaudio.muted {
+    color: #90b1b1;
+}
+
+#temperature {
+    color: #f0932b;
+}
+
+#temperature.critical {
+    color: #eb4d4b;
+}
+
+#tray {
+    color: #2980b9;
+}
+
+#tray>.passive {
+    -gtk-icon-effect: dim;
+}
+
+#tray>.needs-attention {
+    -gtk-icon-effect: highlight;
+    background-color: #eb4d4b;
+}
+
+#idle_inhibitor {
+    color: red;
+}
+
+#idle_inhibitor.activated {
+    color: lightgreen;
+}
+
+#scratchpad {
+    background: rgba(0, 0, 0, 0.2);
+}
+
+#scratchpad.empty {
+    background-color: transparent;
+}
+
+#custom-wakatime {
+    color: darksalmon;
+}
+
+#custom-dunst {
+color: aquamarine
+}
+
+#custom-dunst.dnd {
+    color: red;
+    /* text-decoration: strikethrough */
+}